Hesse PU DECORATIVE METAL Base DE 48219-0901

  • Application of real metal by spraying, thus allowing direct application on many substrates. 5 different metal types are available and can be mixed and combined together; IMO-certified
The two-component, light fast base coat PU DECORATIVE METAL DE 48219-0901 is clear and can be mixed with selected Hesse metal powders depending on the desired surface and effect. Furthermore, the different metal powders can be combined in a lacquer/hardener mixture. This allows a large and individualized degree of design freedom when planning and designing this particular surface. PU DECORATIVE-METAL is also IMO-certified.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For all interior fittings, for yachts and for coating furniture.

Technical specifications

Appearance colourless
Density series kg/l 0.986
Flow time (+/- 15 %) 28 s / DIN 53211 - 6 mm
Form of delivery fluid
Non-volatile content series % 40
VOC EU % 60.450001 %
Mixing ratio (by volume) 4 : 1 PU DECORATIVE METAL Hardener DR 4008
Mixing ratio (gravimetric) 100 : 25 PU DECORATIVE METAL Hardener DR 4008

Information on use

Usage time 1 hour at 20 °C
Pot life 90 min / 20 °C
Drying 24 h / 20 °C
Stackable after > 24 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, depending on species and application method. Perform cleaning by sanding on foil or melamine before coating.
Substrate sanding grits from-to 220 - 280
Finishing DE 4500x(gloss level)-0016
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions Mix base lacquer with hardener at first, afterwards add metal powder gravimetrically with 80 parts of metal powder to 20 parts lacquer/hardener mixture and stir in thoroughly without lumps. Apply the mixture in several layers with short initial drying with in total 800 - 1200 g/m². If required, individual decors can be designed (intermediate drying 30 - 60 min / 20 °C) by additional subsequent manual application. The maximum total wet film application amount, if used as flame-retardant coating material for seagoing vessels, is 1000 g/m². Substrate treatment: pre-sanding of primer or other substrate materials with grit 220 - 280. For direct coatings or on cleaned or sanded foils, please apply a test coating to check the adhesion!For more detailed information on the product and methods of using PU DECORATIVE-METAL, please visit our website and click Service / Technical Descriptions / Documents / PU DECORATIVE-METAL.
Particular instructions This product may only be combined with other approved and technically suitable products when it is being used as a flame-retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Regulations II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The choice of workpieces, preparation of the substrate, mixture and processing of the individual components and subsequent treatment of the coated surfaces require special knowledge. Your local sales representative will be happy to advise you. Pre-priming is possible depending on the required finish and carrier material, e.g. using DP 4755-9343 and DP 4791-9343 / DP 491-9343. Metals and metallic surfaces are subject to natural oxidation which may result in a change of colour. For cleaning and care we recommend the products indicated in our presentation. Other polishing and care products may cause changes in colour tone and effect. Coating after > 2 d with PU Cellulose lacquer will prevent oxidation and finger marks. Remove metal abrasion, waxes and polishing residues using special cleaner! “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.