Fields of application
For parquet and wooden flooring with subsequent sealing with Hesse parquet oils. We only recommend oils for roller applications. For furniture and subsequent coating with appropriate PU lacquers.
Technical specifications
| Appearance |
glazing
|
| Density series kg/l |
1.014
|
| Flow time (+/- 15 %) |
60 s / DIN EN ISO 2431 - 3 mm
|
| Form of delivery |
fluid
|
| Non-volatile content series % |
2
|
| VOC EU % |
0 %
|
| Number of coats (max) |
1
|
| Amount per layer (minimum) |
50 g/m²
|
| Amount per layer (max) |
80 g/m²
|
| Total application volume |
80 g/m²
|
Information on use
| Drying |
24 h / 20 °C
|
| Surface preparation |
Only use tannin-rich European white oak. Sapwood, red oak and many American oaks are not suitable due to the low tannin content. The substrate must be dry, dust-free and grease-free.
|
| Substrate sanding grits from-to |
80 - 120
|
| Finishing |
Final treatment 2 x 80 g/m² with suitable Hesse Oils for roller application from the Hesse parquet floor range is required.
|
| Yield per coat |
13 - 20 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
| Working Temperature Range |
16 - 25 °C
|
| Storage temperature |
5 - 30 °C
|
| Working temperature |
20 °C
|
| conditions of transport |
frost-free - up to a maximum of 35 °C
|
| Processing instructions |
Apply the stain using a short haired roller to moisten well, but without excess. Then level the surface with a slightly damp roller. The effect arises after the chemical reaction with the wood. Do not spray material.
|
| Particular instructions |
Depending on the degree of use, wooden floor coatings become worn with the passage of time. Proper care or timely resealing of the clear-coated surface prevent the need for an expensive, full renovation. Although this becomes unavoidable if the stain layer is already damaged. To gain a proper impression of the results for yourself and your customer please apply a trial stain and sealing coat to a sufficiently large area of original parquet flooring.
|
| General instructions on workmanship |
Trial staining of the original sanded wood with original coating should be carried out under real conditions. Do not pour soiled stains back into the original containers. Clean tools with water immediately after use. With chemical stains, the use of tools or containers made from corrosive metals is forbidden.
|
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
