Fields of application
As final finish for silky feel and for freshening and care of oiled and waxed woods
Technical specifications
Appearance |
colourless
|
Density series kg/l |
0.821
|
Flow time (+/- 15 %) |
nicht bestimmbar keine Angabe
|
Form of delivery |
Paste
|
Non-volatile content series % |
37
|
Proportion of renewable raw materials % |
18.1
|
VOC EU % |
63 %
|
Number of coats (max) |
1
|
Amount per layer (minimum) |
1 g/m²
|
Amount per layer (max) |
5 g/m²
|
Total application volume |
5 g/m²
|
Information on use
Drying |
1 h / 20°C
|
Load bearing after |
1 h / 20°C
|
Surface preparation |
Oiled or waxed substrate For secondary parts, the product can be applied directly on the correctly polished bare wood.
|
Finishing |
Completely remove the surplus product and polish the surface again with a soft cotton cloth.
|
Yield per coat |
164 - 821 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
Working Temperature Range |
20 - 40 °C
|
Storage temperature |
10 - 35 °C
|
Working temperature |
20 °C
|
conditions of transport |
frost-free - up to a maximum of 35 °C
|
Processing instructions |
Single manual application with a soft cotton cloth on oiled or waxed surfaces.. Completely remove the surplus product and polish the surface again with a soft cotton cloth. For secondary parts, the product can be applied directly on the correctly polished bare wood.
|
Particular instructions |
No danger of self-ignition. Material contains no oxidative drying oils!
|
General instructions on workmanship |
Please apply a test coat under real conditions!
|
Children's room fittings, natural maple
Wood sanding: grit 180 - 220 with subsequent dust removal.
Basecoat: 1 x 40 - 60 g/m² Proterra RESIT GE 17102.
Drying: approx. 30 - 60 min / 20 °C room temperature and adequate air circulation
Polishing sanding: 400 grit with following de-dusting.
End finish: by manual application with soft cotton cloth Proterra CERAFLUID GZ 1020. Remove excess and polish surface with a soft cotton cloth.
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.