Hesse UNA-PUR DE 55x(gloss level)

UNA-PUR is a light fast and transparent multicoat lacquer. Its wide variety of uses and uncomplicated application make UNA-PUR outstanding as a multi-coat lacquer on all customary wood species and in parallel an excellent finishing lacquer on Hesse PU colour lacquers. Given its superb adhesion properties, UNA-PUR can also be applied on bleached woods in gloss levels from dull matt to glossy.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

UNA-PUR can be used for shopfitting and all interior fixtures and fittings, including in kitchens and bathrooms as well as the fitting out of ship interiors. UNA-PUR can in parallel be used in different hardening versions. Detailed information on this can be found under “Specific instructions” in this technical information.

Technical specifications

Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specified theoretic spreading rate reduces by up to 40 % with spray applications. Brushing or manual application methods are virtually loss-free. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Appearance colourless
Density series kg/l 0.927 - 0.94
Flow time 33 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 23 - 25.2
VOC EU % 76.46 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 450 g/m²
Mixing ratio (by volume) 10 : 1 PUR Hardener DR 470
Mixing ratio (gravimetric) 100 : 10 PUR Hardener DR 470

Information on use

Usage time 8 h / 20 °C
Pot life 3 d / 20 °C
Drying 2 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation

Clean, dry wood, dependent upon wood type and method of application

Substrate sanding grits from-to 150 - 400
Intermediate lacquer sanding (grits) from-to 280 - 400
Finishing

Coat with products from the same series after drying and lacquer sanding.

Working temperature 20 °C
Processing instructions Hardening the lacquer / hardener mixture (by volume) at 5 : 1 with PU Hardener DR 470 or 10 : 1 with PU Hardener DR 4071 is advisable for coating critical substrates or to optimise chemical and mechanical resistance. Hardening the lacquer / hardener mixture (by volume) at 5 : 1 with PU Hardener DR 4076-0001 after prior mixing of 5 % glass lacquer additive EL 460-0025 to the lacquer components also enables direct lacquering on glass. The glass surface to be lacquered should be cleaned properly beforehand using Hesse Glass cleaner ZD 101.
Particular instructions The stated mixing ratios relate to volumetric hardening; exceptions are highlighted.
This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 150 g/m².
UNA-PU must only be used as a 1-coat finish due to its dull matt formulation! Multicoat lacquer UNA-PU is ideally suited for finishing Hesse UNA-COLOR and produces outstanding metal marking resistance.
UNA-COLOR DB 555-(colour tone) can be used to tint UNA-PU. Pre-priming is possible depending on surface requirements and substrate, e.g. using Hesse base coats DG 434, DG 417, DG 468-1 and DG 4763.
“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship

PU lacquers should not be applied or dried at material and room temperatures below 18 °C and 40 % ambient humidity, ideal values: 20 - 25 °C and 50 - 65 % RH. Deviations lead to problems with drying and/or curing. To avoid adhesion problems, please gently sand back the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached wood must be allowed at least 48 h intermediate drying / 20 °C before recoating with PU lacquers. The final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature).
Please apply a test coat under real conditions!

Pharmacy fittings in natural rosewood / silky gloss, open-pored
Wood sanding: 150 - 180 grit (dust removal)
Base coat: 1 x 100 - 150 g/m² at 20 °C room temperature with Hesse UNA-PUR DE 557, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470
Intermediate drying: 2 h / 20 °C. Intermediate sanding: 280 - 320 grit (dust removal)
Top coat: 1 x 100 - 150 g/m² at 20 °C room temperature with Hesse UNA-PUR DE 557, mixing ratio (by volume)
10 : 1 with PU hardener DR 470
Packable: after at least 16 h / 20 °C

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.