Hesse PU SOFT-GRIP DU 44130

  • An effect lacquer that feels especially soft (VELVET effect)
  • a particularly attractive dull matt surface finish
Hesse PU SOFT-GRIP DU 44130 is a clear, two component PU finishing lacquer that features a pleasantly soft, dull-matt finish. Lots of modern-day effect concepts can be realised on the transparent Hesse PU basecoats or with pastel colour tones from the DB 555-(colour tone) / DB 45245-(colour tone) coloured lacquer range.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

Hesse PU-SOFT-GRIP can be used on all interior fittings in the home other than in high-demand areas, such as kitchens and bathrooms.

Technical specifications

Yield per coat 5 - 8 m²/l

The spreading rate is heavily dependent on the type of application. The specified theoretic spreading rate reduces by up to 40 % with spray applications. Brushing or manual application methods are virtually loss-free. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Appearance colourless
Density series kg/l 0.96
Flow time 28 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 26
VOC EU % 74.03 %
Number of coats (max) 1
Amount per layer (minimum) 120 g/m²
Amount per layer (max) 180 g/m²
Total application volume 180 g/m²
Mixing ratio (by volume) 5 : 1 PUR Hardener DR 4078
Mixing ratio (gravimetric) 100 : 20 PUR Hardener DR 4078

Information on use

Usage time 4 - 5 h / 20 °C
Pot life 5 h / 20 °C
Drying 16 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation On suitable Hesse PU coloured lacquers and primers. Prior to application, the surface must be sanded, clean and free of grease.
Substrate sanding grits from-to 320 - 400
Intermediate lacquer sanding (grits) from-to 320 - 400
Finishing For repair purposes, after thorought sanding apply another coat of the same lacquer. Carry out a sample coating, if required.
Working temperature 20 °C
Particular instructions On dark woods, stains or coloured lacquers, greying may occur due to the product's slightly milky inherent colour. Pre-priming is possible depending on the desired surface finish and substrate, e.g. with DG 4720-0001, DG 4741-0001, DG 4717-0005, DG 4768-0001, DG 4768-0009 as well as pastel colours (not white!)in the DB 45245-(colour tone), DB 45205-(colour tone) / DB 48885-(colour tone) range. In the event of subsequent deliveries after a longer period of time for one object, we recommend reviewing the colour tone. Cleaning and care instructions: please use moist, soft cloths made of microfibre or gauze, for example. To achieve a degreasing/cleaning effect, we recommend using the Hesse cleaners PROTECT-CLEANER PR 90 or INTENSIVE-CLEANER PR 91. Apply both CLEANERS in the given mixing ratio with water and apply a small amount of pressure to clean the dirty surface. While doing so, please observe the Technical Information for products PR 90 and PR 91. Please remove liquids that stain, such as red wine, coffee, tea, mustard, etc. immediately in order to prevent permanent discolouration.
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Laminated MDF sideboard fronts in the signal gray colour tone with the dull matt SOFT-GRIP effect
Edge sanding: grit 150 - 180 (dust removal)
Laminate sanding: grit 320 - 400 (dust removal)
Basecoat: 1 x 150 - 180 g/m², Hesse EASY-FILL DP 4788-9343, mixing ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, addition of 10 % Thinner DV 4900 to the lacquer/hardener mixture
Drying: 5 h / 20 °C, better 16 h / 20 °C
Filler sanding: grit 320 - 400 (dust removal)
Coloured lacquer coating: 1 x 120 - 140 g/m² Hesse FANTASTIC-COLOR DB 48885-7004, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071, addition of Thinner DV 4900 to the lacquer/hardener mixture at 15 - 25 %
Drying: 2 h / 20 °C
Top coat: 1 x 130 - 160 g/m² Hesse PU SOFT-GRIP DU 44130, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4078, addition of 10 - 15 % Thinner DV 4900 to the lacquer/hardener mixture
Drying: 16 h / 20 °C

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.