Hesse PU Mirror lacquer DB 46334-M0966

  • Light-fast
  • outstanding adhesion
  • Fast-drying
  • individual antique effect possible
Hesse PU Mirror effect lacquer DB 46334-M0966 is a light-fast, two-component PU Effect lacquer for glass coating. This fast-drying lacquer with its very good adhesion properties is particularly suitable for exceptional and creative surfaces on white glass. With little effort and by using the Hesse Effect agent DZ 4992-05856 combined with the mirror lacquer an antique effect can be achieved impressively.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

DB 46334-M0966 can be used for the complete interior decoration for the living area on white glass, but as well on structured glass with a suitable protective top coating e.g. DB 42105-(colour tone).

Technical specifications

Appearance opaque
Density series kg/l 0.902
Flow time 32 s / DIN EN ISO 2431 - 4 mm
Form of delivery fluid
Non-volatile content series % 1.3
VOC EU % 98.7 %
Number of coats (max) 1
Amount per layer (minimum) 60 g/m²
Amount per layer (max) 80 g/m²
Total application volume 80 g/m²
Mixing ratio (by volume) 25 : 1 PU Hardener DR 4076-0002
Mixing ratio (gravimetric) 100 : 4 PU Hardener DR 4076-0002

Information on use

Usage time < 3 h / 20 °C
Pot life 8 h / 20 °C
Drying 1 h / 20 °C
Can be coated over within 3 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Substrate preparation is decisive for adhesion of the coating. The glass surface to be coated must be clean and grease-free. Use Hesse Cleaning thinner ZD 101 to carefully clean the surface prior to application.
Substrate sanding grits from-to {Reference (Object) not found: tb3968409101148}
Intermediate sanding (grits) from-to 320 - 400
Finishing Top coating with DB 42105-(colour tone) after maximum drying of 3 h / 20 °C and removal of the spray mist with a gauze cloth with light pressure.
Yield per coat 11 - 15 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions The substrate must be cleaned and degreased thoroughly with Hesse Glass cleaner. The proper preparation of the substrate is decisive for the adhesion of the lacquer.
Particular instructions In case of back-varnishing of glass the inherent colour of the glass affects the subsequent colour tone and effect. If Hesse PU Mirror effect lacquer DB 46334-M0966 shall be used we recommend the application on white glass. Metallic lacquers must always be applied evenly. The application amount, application method and drying conditions affect the colour tone and the effect. If required, please make a test coating under practical conditions.
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Furnishing project, structural glass
Surface preparation: thoroughly clean and remove grease from the structural glass using Hesse Glass cleaner ZD 101
Coating: 1 x 60 - 80 g/m² Hesse PU Mirror lacquer DB 46334-M0966, mixing ratio (by volume) 25 : 1 with PU Hardener DR 4076-0002
Intermediate drying: 15 - 30 min / 20 °C
Use a gauze cloth with light pressure to clean spray mist from the surfaces
Top coat: 1 x 100 - 120 g/m² Hesse PU Glass Colour lacquer DB 42105-1013, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and addition of 5 -10 % thinner DV 490 / DV 4900 to the lacquer/hardener mixture
Packable: after drying for at least 16 h / 20 °C.
Installation or gluing: after 5 d / 20 °C

Glass partition with antique effect
Surface preparation: thoroughly clean and remove grease from the glass using Hesse Glass cleaner ZD 101.
Effect: spray Hesse Effect agent DZ 4992-05856 thinly onto the edges of the glass surface. Allow brief intermediate drying and then achieve the desired effect by dabbing it with a piece of dampened greaseproof paper. Then coat at 60 - 80 g/m² using Hesse PU Mirror lacquer DB 46334-M0966, mixing ratio (by volume) 25 : 1 with PU Hardener DR 4076-0002.
Intermediate drying: 15 - 30 min / 20 °C.
Use a gauze cloth with light pressure to clean spray mist from the surfaces.
Top coat: 1 x 100 - 120 g/m² Hesse PU Glass Colour lacquer DB 42105-8004, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and addition of 5 -10 % Thinner DV 490 / DV 4900 to the lacquer/hardener mixture.
Packable: after drying for at least 16 h / 20 °C
Installation or gluing: after 5 d / 20 °C

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.