Hesse HYDRO Stain BG 200xx

  • Stain appearances range from brilliant to muted
  • Can be used on many woods
  • All tones can be mixed with each other
HYDRO Stains BG 200xx create brilliant to slightly subdued stain effects without significant emphasis of the pores. This water-based stain is environmentally friendly, directly ready to use and can be applied on virtually all woods. The associated stain cards in each case show15 different stain tones demonstrating the diversity of this system.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For staining and subsequent coating of furniture, stairs and doors in industrial and craft applications.Suitable for various application methods, such as spraying or brushing. For use on various woods such as oak, beech, walnut, cherry, mahogany and maple.

Technical specifications

Appearance glazing
Density series kg/l 1.003 - 1.022
Flow time (+/- 15 %) 60 s / DIN EN ISO 2431 - 3 mm
Form of delivery fluid
Non-volatile content series % 0.4 - 3.6
VOC EU % 0.12 %
Number of coats (max) 3
Amount per layer (minimum) 30 g/m²
Amount per layer (max) 80 g/m²
Total application volume 120 g/m²

Information on use

Drying 6 h / 20 °C
Surface preparation The wood must be dry, dust-free and grease-free.
Substrate sanding grits from-to 120 - 180
Finishing Recoatable after at least 2 h drying time with Hesse CN or PU lacquers by spraying, rolling, brushing or curtain coating. After 6 h drying, can be coated with the next coat of suitable 1C or 2C HYDRO lacquers such as HYDRO TOP-SIEGEL HE 6509x(gloss level) or HYDRO-PUR PRIMO HDE 5400x(gloss level) by spraying or flow coating.
Comments on sanding The bare wood can optionally be dampened. After drying overnight, sand or smooth.
Yield per coat 13 - 34 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 5 - 30 °C
Working temperature 20 °C
conditions of transport frost-free - up to a maximum of 35 °C
Processing instructions Application of stain on coarse-pored woods such as oak, walnut, mahogany or ash: apply using a spray gun or brush on with a slight excess. Evenly spread the excess first across then with the grit using a suitable brush. On fine-pored woods such as beech, maple or cherry, we recommend fine spraying with spray gun (nozzle 1.0 to 1.2 mm) without wiping. Stir stains well before and during processing. We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are recommended when spraying stains that are subsequently to be wiped.
Particular instructions All stains from the same range can be mixed together. Lighten by adding water. Can be tinted with colour concentrates in the range: BF 10xx, BP 30xx, BP 3570. Priming with HYDRO lacquers can result in discolorations when using wood species with a high proportion of water-soluble wood constituents (e.g.oak). We therefore recommend a PU base coat, especially in the case of pastel or white colour tones.
General instructions on workmanship Trial staining of the original sanded wood with original lacquering should be carried out under real conditions. Only use stains from one batch for any one job. Do not pour soiled stains back into the original container. Clean tools with water immediately after use. Dried-on stain residue can be removed with thinners such as ZD 82.
Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.