Hesse PICEA Softwood stain WN / WNS (colour tone)

  • pronounced positive effect
  • WN colour tones are universally applicable
  • simple application
The PICEA Softwood stain WN produces brilliantly clear stain images with a positive effect. The colour of the dark rings in the softwood are enhanced. The stains are universally applicable in solvent- and water-based lacquer systems.
PICEA Softwood stains WNS
also contain pigments for white to pastel-coloured colour tones under PUR lacquers. Dyes from the latest generation produce glowing and light-stable stain images. However,
The stain colour card XBK 7 with 15 beautiful softwood colour tones for colour consultations with your customers completes the offer
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

PICEA positive stains are used on European softwoods like pine, fir and larch. A significantly positive effect is achieved on sanded, brushed and hewn wood, just as desired on interior fittings and in furniture making.

Technical specifications

Appearance glazing
Density series kg/l 1.039 - 1.051
Flow time (+/- 15 %) 60 s / DIN EN ISO 2431 - 3 mm
Form of delivery fluid
Non-volatile content series % 15 - 18
VOC EU % 0.28 %
Number of coats (max) 1
Amount per layer (minimum) 50 g/m²
Amount per layer (max) 80 g/m²
Total application volume 80 g/m²

Information on use

Drying 4 h / 20 °C
Surface preparation The wood must be dry, dust-free and grease-free. European softwoods are used as substrates. The woods can be sanded, sandblasted, brushed or hewn.
Substrate sanding grits from-to 100 - 120
Finishing Stains in the WN range can be coated with suitable PU, CN or HYDRO lacquers, as opposed to stains in the WNS range with PU and CN lacquers. The first coat must be completely dry before the next coat is applied. Low temperatures, low air exchange, high humidity and large application quantities all inhibit drying.
Comments on sanding The bare wood can optionally be dampened. After drying overnight, sand or smooth.
Yield per coat 13 - 21 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Working Temperature Range 16 - 25 °C
Storage temperature 5 - 30 °C
Working temperature 20 °C
conditions of transport frost-free - up to a maximum of 35 °C
Processing instructions Apply lightly and evenly by spraying without spreading. Do not forcibly dry. Stir stains well before and during processing.
Particular instructions Saponify resinous woods (e.g. pine, red pine) with Hesse wood soap HBV 243 before staining. All stains from the same range can be mixed with one another.
General instructions on workmanship Trial staining of the original sanded wood with original lacquering should be carried out under real conditions. Only use stains from one batch for any one job. Do not pour soiled stains back into the original container. Clean tools with water immediately after use. Dried-on stain residue can be removed with thinners such as ZD 82.

Pine/fir cupboard wall unit, dull matt
Stain: 1 x 50 g/m² Hesse PICEA Softwood stain WN 20103
Basecoat: 1 x 100 - 120 g/m² Hesse PU Multicoat lacquer DA 408-0, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470
Intermediate drying: 30 - 60 min / 20 °C
Lacquer sanding: 280 - 320 grit (dust removal)
Top coat: 1 x 100 - 120 g/m² Hesse PU Multicoat lacquer DA 408-0, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470
Packable: after at least 16 h / 20 °C

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.