Hesse CN Sanding sealer NG 3800

  • [can be sprayed or curtain coated]
  • [good body]
  • [sands to a powder]
  • [can be force dried]
The clear Hesse CN fine sanding base NG 3800 has very good body. It is fast drying and sands to a powder. In combination with Hesse CN hard coating lacquers this coating product is a valued, one component nitrocellulose basecoat that is uncomplicated to apply. The product is free from phthalate softeners and therefore also suitable for coating children's toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

NG 3800 is used for coating residential furniture and for interior decoration.

Technical specifications

Appearance colourless
Density series kg/l 0.915
Flow time (+/- 15 %) 45 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 22
Proportion of renewable raw materials % 0.1
VOC EU % 77.260002 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 120 g/m²
Total application volume 300 g/m²

Information on use

Drying 30 min / 20 °C
Stackable after > 6 h / 20 °C
Complete drying 16 h / 20 °C
Surface preparation Clean dry wood, according to the wood type, application process and desired effect.
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 280 - 320
Finishing Can be coated with matching Hesse top coats after adequate drying and careful sanding, for example with: EH 3303x(gloss level), EH 3318x(gloss level)-0021, NU 30129
Yield per coat 8 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions You can apply one to three coats at 100 - 120 g/m². The maximum application amount in wet film totals 300 g/m2.
Particular instructions Please test the lacquer under real conditions, if necessary.

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Material Safety Data Sheets


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.