Hesse CN Hard coating lacquer NH 36x(gloss level)

  • elegant surface formation
  • Can be polished and buffed
  • suitable for children's toys
Hesse CN Hard coating lacquer NH 36x(gloss level) is a clear, scratch and abrasion resistant top coat for application on suitable Hesse CN basecoats. The lacquer features very good levelling and a sophisticated surface finish. The NH 36x(gloss level) range is free from phthalate softeners and can be used to coat children’s toys. This top coat can also be polished and buffed to gloss level 9.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

The Hesse CN hard coating lacquer can be used for high quality residential furniture to achieve a refined finish on high-wear surfaces.

Technical specifications

Appearance colourless
Density series kg/l 0.9 - 0.905
Flow time (+/- 15 %) 28 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 19.1 - 19.8
Profile of properties Can be polished
VOC EU % 77.87 %
Number of coats (max) 2
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 300 g/m²

Information on use

Drying 30 min / 20 °C
Stackable after > 4 h / 20 °C
Complete drying 16 h / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application.
Lacquer sanding (grit) from - to 280 - 320
Finishing For repair purposes, after thorought sanding apply another coat of the same lacquer.
Comments on sanding 400 - 600 (basecoat for NH 369)
Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions Single-coat application at 100 - 150 g/m² on suitable Hesse basecoats. The maximum application amount in wet film totals 150 g/m2.
Particular instructions For PVC-resistant surfaces please use Hesse ECO TOP-SIEGEL FF 31x(gloss level) or Hesse PU multicoat lacquers. The product NU 369 can be polished and buffed. For further details, please see our separate Technical Information on "Polishing." Pre-priming is possible depending on the desired finish and substrate, for example with: NG 380.
General instructions on workmanship Please test the lacquer under real conditions, if necessary.

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.