Hesse 1C Sealing lacquer EH 37x(gloss level)

  • PVC-resistant
  • aromatic-free
  • universally usable
Hesse 1C Sealing lacquer EH 37x(gloss level) is an aromatic free, one component nitrocellulose lacquer that is also PVC resistant. This multicoat lacquer can be used for priming and top coating and is resistant to water and alcoholic drinks. The product is free from phthalate softeners and can therefore also be used for coating children’s toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

It can be used on all interior fittings and throughout living areas.

Technical specifications

Appearance colourless
Density series kg/l 0.911 - 0.92
Flow time (+/- 15 %) 76 s / DIN EN ISO 2431 - 4 mm
Form of delivery fluid
Non-volatile content series % 20 - 23
Proportion of renewable raw materials % 0.3 - 4.1
VOC EU % 78.68 %
Number of coats (max) 3
Amount per layer (minimum) 80 g/m²
Amount per layer (max) 150 g/m²
Total application volume 350 g/m²

Information on use

Drying 30 min / 20 °C
Stackable after > 6 h / 20 °C
Complete drying 16 h / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application.
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 280 - 320
Finishing After sufficient drying and immediately after interim sanding with lacquer from the same product range.
Yield per coat 6 - 11 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions You can apply two or three coats at 80 - 150 g/m². The maximum application amount in wet film totals 350 g/m2.This product must not be combined with other products in the overall build-up of the finish!
Particular instructions PVC-stability is achieved after 2 to 3 weeks.
General instructions on workmanship Please test the lacquer under real conditions, if necessary.

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.