Hesse CN Top coat NU 30129 high gloss

  • elegant surface formation
  • Can be polished and buffed
  • suitable for children's toys
Hesse CN top coat NU 30129 is a clear top coat for application on matching Hesse NC basecoats. In addition to its very good levelling and sophisticated surface finish, this high gloss, nitrocellulose lacquer can be polished. This product is free from phthalate softeners and can be used to coat children’s toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

The Hesse CN top coat can be used for high quality residential furniture to achieve a refined finish on high-wear surfaces.

Technical specifications

Appearance colourless
Density series kg/l 0.903
Flow time (+/- 15 %) 28 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 21.4
Profile of properties Can be polished
VOC EU % 77.87 %
Number of coats (max) 2
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 300 g/m²

Information on use

Drying 30 min / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 16 h / 20 °C
Surface preparation Prior to application, the surface must be sanded, clean and free of grease.
Substrate sanding grits from-to 400 - 600
Finishing For repair purposes, another coat of the same product can be applied after adequate drying and careful sanding to remove nibs.
Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions Single-coat application at 100 - 150 g/m² on suitable Hesse basecoats. The maximum application amount in wet film totals 150 g/m2.
Particular instructions The product NU 30129 can be polished and buffed. For further details please see our separate Technical Information on "Polishing." Pre-priming is possible depending on the desired finish and substrate, for example with: NG 3880, NG 3808.
General instructions on workmanship Please test the lacquer under real conditions, if necessary.

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.