Hesse CN Multicoat lacquer EH 3339x(gloss level) can be used for residential furniture and interior fittings.
| Appearance | colourless |
| Flow time (+/- 15 %) | 34 s / DIN 53211 - 4 mm |
| Form of delivery | fluid |
| VOC EU % | 79.589996 % |
| Number of coats (max) | 3 |
| Amount per layer (minimum) | 80 g/m² |
| Amount per layer (max) | 150 g/m² |
| Total application volume | 350 g/m² |
| Drying | 30 min / 20 °C |
| Stackable after | > 6 h / 20 °C |
| Complete drying | 16 h / 20 °C |
| Surface preparation | Clean, dry wood, dependent upon wood type and method of application. |
| Substrate sanding grits from-to | 150 - 180 |
| Lacquer sanding (grit) from - to | 280 - 320 |
| Finishing | After sufficient drying and immediately after interim sanding with lacquer from the same product range. |
| Storage temperature | 10 - 30 °C |
| Working temperature | 20 °C |
| Processing instructions | You can apply two or three coats at 80 - 150 g/m². The maximum application amount in wet film totals 350 g/m2. |
| Particular instructions | For PVC-resistant surfaces please use CN Ethanol Multicoat lacquer EH 3311x(gloss level) or Hesse PU Multicoat lacquers. |
| General instructions on workmanship | Please test the lacquer under real conditions, if necessary. |
The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.