Hesse CN Pigment filler NP 180-(FT)

  • Well structured
  • Can be sanded to a fine powder
  • fast-drying
  • Free of aromatic substances and free from phthalate plasticisers
  • Can be applied directly to the edges of MDF
A pigmented nitrocellulose primer, very well filling and well covering. Hesse CN Pigment filler NP 180-(colour tone) is quick drying and very powdered sandable. In addition, the product is formulated to be free from aromas and phthalate softeners and suitable for coating children's toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For home furniture, interior design and various types of wood, primer foils and MDF. Direct edge coating of MDF is also possible.

Technical specifications

Appearance opaque
Density series kg/l 0.983 - 1.173
Flow time (+/- 15 %) 33 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 28.4 - 48.6
VOC EU % 70.98 %
Number of coats (max) 2
Amount per layer (minimum) 150 g/m²
Amount per layer (max) 180 g/m²
Total application volume 350 g/m²

Information on use

Drying 1 h / 20 °C
Stackable after > 3 h / 20 °C
Complete drying 24 h / 20 °C
Surface preparation Clean, dry wood, depending on species and application method. Perform cleaning by sanding on foil or melamine before coating.
Substrate sanding grits from-to 150 - 320
Lacquer sanding (grit) from - to 320 - 400
Finishing After proper cutting back of the lacquer with Hesse EB or NB coloured lacquers. (For instance, Hesse CN Coloured lacquer ranges EB 13x(gloss level)-(colour tone) or NB 130x(gloss level)-(colour tone))
Comments on sanding To exclude bond failures within the coating layers, already coated and sanded transparent or pigmented NC lacquers must be coated with the desired finish within one working day (8 h). If this time is exceeded, the surface will need to be cut back again.
Yield per coat 6 - 7 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions
One to three-coat application with 150 - 180 g/m² is possible. The maximum total application amount is 360 g/m².
Particular instructions When top coating in pastel colour tones in particular, with the usual Hesse CN coatings and finishing lacquers, for better colour stability we recommend the addition of 2 - 5 % NP 180-(colour tone).
General instructions on workmanship Please apply a test coat under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.