Used for open-pore, coloured coatings on woods without active substances and as a colour lacquer on filled substrate material.
| Appearance | opaque |
| Density series kg/l | 0.935 - 1.089 |
| Flow time (+/- 15 %) | 48 s / DIN 53211 - 4 mm |
| Form of delivery | fluid |
| Non-volatile content series % | 23.6 - 42.2 |
| VOC EU % | 74.66 % |
| Number of coats (max) | 2 |
| Amount per layer (minimum) | 100 g/m² |
| Amount per layer (max) | 150 g/m² |
| Total application volume | 350 g/m² |
| Drying | 40 min / 20 °C |
| Stackable after | > 40 - 60 min / 20 °C |
| Complete drying | 24 h / 20 °C |
| Surface preparation | Clean, dry wood, depending on species and application method. Perform cleaning by sanding on foil or melamine before coating. |
| Substrate sanding grits from-to | 150 - 320 |
| Lacquer sanding (grit) from - to | 320 - 400 |
| Finishing | After careful lacquer sanding with the same product or for absolute metal marking resistance and colour abrasion resistance with thinned transparent Hesse CN lacquer. |
| Comments on sanding | To exclude bond failures within the coating layers, already coated and sanded transparent or pigmented NC lacquers must be coated with the desired finish within one working day (8 h). If this time is exceeded, the surface will need to be cut back again. |
| Yield per coat |
7 - 10 m²/l The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner. |
| Storage temperature | 16 - 40 °C |
| Working temperature | 20 °C |
| Processing instructions |
One to two coat application at 100 - 150 g/m² on suitable substrates. The maximum total application amount is 350 g/m². |
| Particular instructions |
Pre-priming is possible depending on the required finish and carrier material, e.g. using Hesse NC Pigment filler NP 180-9343 or Hesse FANTASTIC-FILL DP 4755-9343. Improvement in light stability when transparent top coating with Hesse CN Pigment lacquer EB 13x(gloss level)-(colour tone) can be achieved by adding 5 - 10 % of the respective pigment lacquer to tint the transparent nitrocellulose lacquer. |
| General instructions on workmanship |
Please apply a test coat under real conditions! |
Wall unit in beech, white satin gloss
Bare wood sanding: 150 - 180 grit (dust removal)
Basecoat: 1 x 130 - 150 g/m² Hesse CN Pigment lacquer EB 137-9010, addition of 5 - 20 % Thinner NV 390
Drying: at least 30 - 60 min / 20 °C
Lacquer sanding: 320 - 400 grit (dust removal)
Drying: at least 30 - 60 minutes at 20 °C
Top coat: 1 x 130 - 150 g/m² Hesse CN Pigment lacquer EB 137-9010, addition of 5 - 20 % Thinner NV 390
Complete drying: at least 4 h / 20 °C
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.