Fields of application
Used for open-pore, coloured coatings on woods without active substances and as a colour lacquer on filled substrate material.
Technical specifications
Appearance |
opaque
|
Density series kg/l |
0.913 - 1.122
|
Flow time (+/- 15 %) |
50 s / DIN 53211 - 4 mm
|
Form of delivery |
fluid
|
Non-volatile content series % |
0 - 45.9
|
Proportion of renewable raw materials % |
0 - 2.976732
|
VOC EU % |
59.91 %
|
Number of coats (max) |
2
|
Amount per layer (minimum) |
100 g/m²
|
Amount per layer (max) |
150 g/m²
|
Total application volume |
350 g/m²
|
Information on use
Drying |
40 min / 20 °C
|
Stackable after |
> 40 - 60 min / 20 °C
|
Complete drying |
24 h / 20 °C
|
Surface preparation |
Clean, dry wood, depending on species and application method. Perform cleaning by sanding on foil or melamine before coating.
|
Substrate sanding grits from-to |
150 - 320
|
Lacquer sanding (grit) from - to |
320 - 400
|
Finishing |
After careful lacquer sanding with the same product or for absolute metal marking resistance and colour abrasion resistance with thinned transparent Hesse CN lacquer.
|
Comments on sanding |
To exclude bond failures within the coating layers, already coated and sanded transparent or pigmented NC lacquers must be coated with the desired finish within one working day (8 h). If this time is exceeded, the surface will need to be cut back again.
|
Yield per coat |
7 - 10 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
Storage temperature |
16 - 40 °C
|
Working temperature |
20 °C
|
Processing instructions |
One to two coat application at 100 - 150 g/m² on suitable substrates. The maximum total application amount is 350 g/m².
|
Particular instructions |
Pre-priming is possible, depending on the desired surface and substrate, for instance using NC Pigment filler NP 180-9343 or PU Isolating filler DP 4777-9343. Our transparent NC lacquer can be tinted by the addition of 5 - 10 % of the respective pigment coating to improve the light stability of the transparent top coat of UNA-CN-COLOR EB 130x(gloss level)-(colour tone).
|
General instructions on workmanship |
Please apply a test coat under real conditions!
|
The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.