Hesse PU Primer DG 468-2

  • IMO-approved
  • very well filling
  • Excellent sanding finish
  • Good hold under high gloss
  • extremely high application quantities are permissible
Hesse PU Basecoat DG 468-2 is a transparent two-component PU polyester resin basecoat. The lacquer sands well, is extremely elastic and has good body. This product is particularly suitable for building up a closed-pore finish. It also fulfills the requirements of the IMO EC Type Examination test certificate (flame retardant coating material for seagoing vessels).
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

Hesse PU Base DG 468-2 is particularly suitable for decorative accents in closed-pore lacquer structures beneath Hesse PU intermediate and finishing lacquers or Hesse PU high gloss lacquers. This base coat is used primarily in the high quality fit-out of ships, the interior design sector and shopfitting.

Technical specifications

Appearance colourless
Density series kg/l 0.968
Flow time (+/- 15 %) 44 s / DIN EN ISO 2431 - 4 mm
Form of delivery fluid
Non-volatile content series % 39
VOC EU % 61.07 %
Number of coats (max) 9
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 200 g/m²
Total application volume 1200 g/m²
Mixing ratio (by volume) 1 : 1 PUR Hardener DR 439
Mixing ratio (gravimetric) 100 : 101 PUR Hardener DR 439

Information on use

Usage time 30 - 60 min / 20 °C
Pot life 90 min / 20 °C
Drying 6 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean dry wood, according to the wood type, application process and desired effect.
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 320 - 400
Finishing After sufficient drying, can be re-coated using suitable light-fast Hesse polyurethane multi-coat, top coat and brilliant lacquers.(e.g. DU 449 / DU 44099, DU 4812x(gloss level), DE 55x(gloss level) / DU 4259x(gloss level))
Comments on sanding {Reference (Object) not found: tb3832871425137}
Yield per coat 5 - 10 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions The maximum application amount in wet film when used as a flame-retardant coating material for seagoing vessels totals 140 g/m². At high temperatures we recommend adjustment of the application viscosity using DV 4981 thinner!
Particular instructions In order to improve the stability and bonding to critical woods such as tropical woods and cherry, we recommend pre-priming with Hesse PU isolating primer DG 572-1 / DG 4720-0001.The product is not suitable for use on bleached surfaces! When being used as a flame-retardant coating agent for seagoing vessels in accordance with SOLAS 74/88 Regulations II-2/3, II-2/5 and II-2/6, in the latest version, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, this product may only be combined with other approved and technically suitable products.
“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Material Safety Data Sheets


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.