Fields of application
Hesse PU Basecoat DG 4730 can be used on all interior fittings, including as a basecoat on critical substrates (metals) for subsequent coatings in kitchens and bathrooms. {Reference (Object) not found: tb4996505973384}
Technical specifications
Appearance |
colourless
|
Density series kg/l |
0.974
|
Flow time (+/- 15 %) |
25 s / DIN EN ISO 2431 - 4 mm
|
Form of delivery |
fluid
|
Non-volatile content series % |
36
|
Profile of properties |
- Can be polished
- Highly elastic
|
VOC EU % |
63.919998 %
|
Number of coats (max) |
5
|
Amount per layer (minimum) |
100 g/m²
|
Amount per layer (max) |
180 g/m²
|
Total application volume |
600 g/m²
|
Mixing ratio (by volume) |
5 : 1 PU Hardener DR 4071
|
Mixing ratio (gravimetric) |
100 : 20 PU Hardener DR 4071
|
Information on use
Usage time |
5 - 6 h / 20 °C
|
Pot life |
8 h / 20 °C
|
Drying |
16 h / 20 °C
|
Stackable after |
> 16 h / 20 °C
|
Complete drying |
7 d / 20 °C
|
Surface preparation |
All grease must be carefully removed from the substrate prior to use as an adhesion primer. When directly coating cleaned or sanded laminates or when using as an adhesion primer on plastics, please make a test lacquering for proper adhesion!
|
Substrate sanding grits from-to |
150 - 400
|
Lacquer sanding (grit) from - to |
320 - 400
|
Finishing |
After renewed slight sanding it can be recoated with itself or matching products. (e.g. DE 4259x(gloss level), DE 4503x(gloss level), DB 4524x-(colour tone), DB 4520x(gloss level)-(colour tone))
|
Yield per coat |
5 - 10 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
Storage temperature |
16 - 25 °C
|
Working temperature |
20 °C
|
General instructions on workmanship |
PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week. Please apply a test coat under real conditions!
|
The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.