Hesse MEGA-PUR DE 56x(gloss level)

  • Particular elegance and appeal
  • 100 % light fast, so ideal on PU colour lacquers
  • easy application on vertical surfaces
  • can be applied to bleached woods
MEGA-PUR is a 100 % light fast and transparent acrylate-based multi-coat lacquer. Its uncomplicated application on three-dimensional components makes MEGA-PUR eminently suitable as a multi-coat lacquer on all customary woods and in parallel as an excellent finishing lacquer on Hesse PU colour lacquers. Its good body and elegant looks mean that MEGA-PUR can be used on bleached woods as required.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

MEGA-PUR can be used for shopfitting and all interior fixtures and fittings, including in kitchens and bathrooms and for the fitting out of ship interiors. MEGA-PUR can in parallel be used in different hardening versions depending on application.

Technical specifications

Appearance colourless
Density series kg/l 0.904 - 0.922
Flow time 32 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 21.9 - 25.1
VOC EU % 76.65 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 450 g/m²
Mixing ratio (by volume) 10 : 1 PUR Hardener DR 470
Mixing ratio (gravimetric) 100 : 10 PUR Hardener DR 470

Information on use

Usage time 8 h / 20 °C
Pot life 16 h / 20 °C
Drying 2 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 280 - 320
Finishing Coat with products from the same series after drying and lacquer sanding.
Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions

MEGA-PUR can as necessary be mixed at a mixing ratio (by volume) of 5 : 1 with DR 470 and at a mixing ratio (by volume) of 10 : 1 with DR 4071 to optimise chemical and mechanical resistance.

Particular instructions

This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 240 g/m². 

Do not use the extra matt formulation of MEGA-PUR as a multicoat lacquer, but only as a 1-coat finish on the next higher gloss level in the series or on matching base coats! Pre-priming is possible depending on the desired surface and substrate, e.g. using Hesse Base coats DG 572-1, DG 434, DG 534, DG 417 and OPTI-BASE DG 4750.  MEGA-PUR Multicoat lacquer is suitable for finishing Hesse UNA-COLOR and FANTASTIC-COLOR and its transparent finish improves metal marking resistance. This operation can also be used in parallel to individually determine the gloss level of the colour lacquer applied. The stipulated test certificates relate exclusively to a mixing ratio (by volume) of 10 : 1 with PU Hardener DR 470. “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU lacquers should not be used and dried at product and room temperatures below 18 °C and below 40 % RH , ideal values: 20 -25 °C, 50 - 65 % RH. Deviations lead to problems with drying or, as may apply, hardening. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached woods must be dried for at least 48 h / 20 °C before being coated with PU lacquers. If stored correctly (at least 20 °C room temperature), complete hardening of the coating is achieved after a week.
Please apply a test coat under real conditions!

Interior fittings in a restaurant in natural beech, semi matt, execution as per DIN 4102 B1
Wood sanding: 120 - 180 grit (dust removal)
Basecoat: 1 x 100 - 150 g/m² at 20 °C room temperature using Hesse MEGA-PUR DE 564, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470
Intermediate drying: at least 2 h / 20 °C
Lacquer sanding: 280 - 320 grit (dust removal)
Top coat: 1 x 100 - 150 g/m² at 20 °C room temperature using Hesse MEGA-PUR DE 564, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470
Packable: after at least 16 h / 20 °C

Safety Data Sheets / Certificates

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.