Fields of application
Can be used for a natural wood effect mainly on maple, oak, conifers (also treated with positive stain) and softwoods. Aside from that, the product can be used with different types of hardeners and mixing ratios
Technical specifications
| Appearance |
colourless
|
| Density series kg/l |
0.919
|
| Flow time (+/- 15 %) |
30 s / DIN 53211 - 4 mm
|
| Form of delivery |
fluid
|
| Non-volatile content series % |
18
|
| Profile of properties |
Brightening
|
| VOC EU % |
82.169998 %
|
| Number of coats (max) |
3
|
| Amount per layer (minimum) |
100 g/m²
|
| Amount per layer (max) |
150 g/m²
|
| Total application volume |
450 g/m²
|
| Mixing ratio (by volume) |
10 : 1 PUR Hardener DR 470
|
| Mixing ratio (gravimetric) |
100 : 10 PUR Hardener DR 470
|
Information on use
| Usage time |
8 h / 20 °C
|
| Pot life |
8 h / 20 °C
|
| Drying |
1 h / 20 °C
|
| Stackable after |
> 16 h / 20 °C
|
| Complete drying |
7 d / 20 °C
|
| Substrate sanding grits from-to |
120 - 180
|
| Lacquer sanding (grit) from - to |
280 - 320
|
| Finishing |
With another coat of the same. One-off over-painting with transparent PU lacquers is possible after at least 48 h intermediate drying at 20 °C.
|
| Yield per coat |
6 - 9 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
| Storage temperature |
16 - 25 °C
|
| Working temperature |
20 °C
|
| Processing instructions |
If necessary, the product can be mixed with DR 4071 (mixing ratio 10:1 (volumetric)) to optimize the chemical and mechanical resistance.
|
| Particular instructions |
The brightening effect is only achieved when the lacquer is applied directly onto the wood or onto HYDRO stains, such as positive stains. Only a fresh lacquer / hardener mixture guarantees an optimum brightening effect!
Individual toning is optionally possible with:
up to 10 % DB 555-(colour tone) or
up to 5 % with Colour concentrates ZD 1-(colour tone) or
up to 5 % with Colour concentrates CF xx or CPxx (exception CP 70xx).
An additional coat can be applied after sufficient drying and proper sanding, e.g. using DE 55x(gloss level) or DE 56x(gloss level).
This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 250 g/m².
“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
|
| General instructions on workmanship |
PU lacquers should not be applied or dried at material and room temperatures of less than 18 °C and 40 % RH, ideal values: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or curing errors. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached woods must undergo intermediate drying for at least 48 h / 20 °C before overpainting with PU lacquers. If stored correctly (at least 20 °C room temperature), complete hardening of the coating is achieved after a week. Please test the lacquer under real conditions!
|
Maple sideboard, dull matt
Wood sanding: 150 - 180 grit
Basecoat: 1 x 120 - 140 g/m² Hesse PU Natural wood effect DA 400-1, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470.
Intermediate drying: 30 - 60 min / 20 °C
Lacquer sanding: 320 - 400 grit
Top coat: 1 x 120 - 140 g/m² Hesse PU Natural wood effect DA 400-1, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470.
Dust dry: after 15 - 20 min / 20 °C
Packable: after at least 16 h / 20 °C
Safety Data Sheets / Certificates
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
