Fields of application
For all interior fixtures and fittings and for coating furniture made from all types of wood. Aside from that, the product can be used with different types of hardeners and mixing ratios
Technical specifications
| Appearance |
colourless
|
| Density series kg/l |
0.894 - 0.92
|
| Flow time (+/- 15 %) |
60 s / DIN EN ISO 2431 - 4 mm
|
| Form of delivery |
fluid
|
| Non-volatile content series % |
17 - 23
|
| Proportion of renewable raw materials % |
0.2 - 0.6
|
| VOC EU % |
80.889999 %
|
| Number of coats (max) |
3
|
| Amount per layer (minimum) |
100 g/m²
|
| Amount per layer (max) |
150 g/m²
|
| Total application volume |
450 g/m²
|
| Mixing ratio (by volume) |
10 : 1 PU Hardener DR 4070
|
| Mixing ratio (gravimetric) |
100 : 10 PU Hardener DR 4070
|
Information on use
| Usage time |
8 h / 20 °C
|
| Pot life |
8 h / 20 °C
|
| Drying |
4 h / 20 °C
|
| Stackable after |
> 16 h / 20 °C
|
| Complete drying |
7 d / 20 °C
|
| Surface preparation |
Clean dry wood, according to the wood type, application process and desired effect.
|
| Substrate sanding grits from-to |
150 - 180
|
| Lacquer sanding (grit) from - to |
280 - 320
|
| Finishing |
After sufficient drying and lacquer sanding, it can be combined with almost all PU lacquers.
|
| Yield per coat |
6 - 9 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
| Storage temperature |
16 - 25 °C
|
| Working temperature |
20 °C
|
| Processing instructions |
The product can as necessary be mixed at a mixing ratio (by volume) of 5 : 1 with DR 4070 and at a mixing ratio (by volume) of 10 : 1 with DR 4071 to optimise its chemical and mechanical resistance.
|
| Particular instructions |
The product is also suitable for top coating PU coloured lacquers and provides improved protection against ring stains. Use the dull matt formulation of Hesse PU Multicoat lacquer DE 45000 as a single coating, rather than as a multicoat lacquer!
|
| General instructions on workmanship |
PU coatings should not be used or dried at material and room temperatures of less than 18 °C and 40 % RH, ideal values: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or curing errors. To avoid adhesion problems, please gently sand back the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached woods must undergo intermediate drying for at least 48 h / 20 °C before overpainting with PU lacquers. If stored correctly (at least 20 °C / room temperature), complete hardening of the coating is achieved after a week.
Please conduct a sample coating under real conditions!
|
The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
