Hesse PU Multicoat lacquer DE 4532x(gloss level)

Two-component PU acrylate resin lacquer, clear, light fast and high-build. A coating lacquer for use as a primer and as a final coat. Highly resistant, particularly to mechanical strain Can be applied to bleached woods. Moreover, it is free from phthalate plasticisers, so that it is also suitable for coating children's toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For all interior fixtures and fittings and also suitable for brush and roller application. Can also be used as a thinner to seal the edges of MDF.

Technical specifications

Appearance colourless
Density series kg/l 0.937 - 0.947
Flow time (+/- 15 %) 33 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 25 - 26
Proportion of renewable raw materials % 0 - 0.504
VOC EU % 74.839996 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 450 g/m²
Mixing ratio (by volume) 10 : 1 PU Hardener DR 4071
Mixing ratio (gravimetric) 100 : 10 PU Hardener DR 4071

Information on use

Pot life 8 h / 20 °C
Drying 5 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application. In order to avoid problems with bonding, please sand PU lacquered surfaces before applying fresh lacquer, and apply lacquer to the sanded surfaces as soon as possible.
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 240 - 320

After sufficient drying and lacquer sanding, it can be combined with almost all PU lacquers.

Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions At a mixing ratio (by volume) 5 : 1 with PU Hardener DR 4071, then PU Multicoat lacquer DE 4503x(gloss level), with the addition of 30 % thinner, is suitable for applying lacquer to wenge.
Particular instructions The dull matt formulation of this PU Multicoat lacquer means it must not be used as a build-up lacquer, but rather only as a single coating on top of the next higher degree of gloss in the same range or on appropriate primers. For use as MDF edge sealant beneath coloured coating systems, prepare the mixture with 20 - 30 % DV 4900 thinner and apply an additional coat on the same day following prior sanding with grit 320. This product can be used as a top coat on PU coloured lacquers in order to create an improved ring stain resistance.
General instructions on workmanship PU lacquers should not be applied or dried at material and room temperatures below 18 °C and 40 % RH, ideal values: 20 - 25 °C and 50 - 65 % RH. Deviations lead to problems with drying and/or curing. To avoid adhesion problems, please gently sand back the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached wood must be allowed at least 48 h intermediate drying / 20 °C before recoating with PU lacquers. The final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature).
Please conduct a sample coating under real conditions!

Table in natural beech/matt
Wood sanding: 150 - 180 grit (dust removal)
Priming: 1x 120 - 150 g/m² with Hesse PU Multicoat lacquer DE 45322, mixing ratio (by volume) 10 : 1 with PU hardener DR 4071
Intermediate drying at least 4 h / 20 °C
Intermediate cutting back with grit 280 - 320 (dust removal)
Finishing coat: 1 x 120 - 150 g/m² with Hesse PU Multicoat lacquer DE 45322, mixing ratio (by volume) 10 : 1 with PU hardener DR 4071
Ready for transport: after drying for at least 16 h/20 °C


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.