Hesse PU Multicoat lacquer DE 4273x(gloss level)

  • full
  • high mechanical stability
  • formulated with light protection
Two component PU acrylic resin lacquer, full-bodied, clear and light fast. A multicoat lacquer for priming and top coating with very high resistance, particularly to mechanical stresses. This product is free from phthalate softeners and therefore also suitable for coating children's toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For all interior fixtures and fittings. Can also be diluted for application as MDF edge isolation.

Technical specifications

Appearance colourless
Density series kg/l 0.954 - 0.964
Flow time (+/- 15 %) 32 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 27.1 - 28.9
VOC EU % 72.33 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 400 g/m²
Mixing ratio (by volume) 10 : 1 PUR Hardener DR 4074
Mixing ratio (gravimetric) 100 : 10 PUR Hardener DR 4074

Information on use

Usage time 8 h / 20 °C
Pot life 8 h / 20 °C
Drying 3 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application
Substrate sanding grits from-to 150 -180
Lacquer sanding (grit) from - to 280 - 320
Finishing After sufficient drying and lacquer sanding, it can be combined with almost all PU lacquers.
Yield per coat 6 - 10 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Particular instructions For use as MDF edge-insulation under coloured coating systems, which dilute the lacquer/hardener mixture for the PU Multicoat lacquer DE 4273x(gloss level) with 20 - 30 % DV 4900. Recoated on the very same day, following sanding beforehand with a grit of 320 - 400. This product only has limited suitability for top-coating coloured surfaces. Complete resistance to metal marking is not achieved on account of the slightly abrasive surface texture. Here we recommend the use e.g. of the PU Multicoat lacquer of the DE 4259x(gloss level) series or the PU Multicoat lacquer of the EN 4503x(gloss level) series.
General instructions on workmanship PU lacquers should not be applied or dried at material and room temperatures below 18 °C and 40 % RH, ideal values: 20 - 25 °C and 50 - 65 % RH. Deviations lead to problems with drying and/or curing. To avoid adhesion problems, please gently sand back the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached wood must be allowed at least 48 h intermediate drying / 20 °C before recoating with PU lacquers. The final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature).
Please conduct a sample coating under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.