Hesse PU Multicoat lacquer DE 4262x(gloss level)

Two-component PU acrylic resin lacquer, light-fast, high-build, can be mechanically sanded and formulated with light protection. A multicoat lacquer for base and top coats with very good hold on vertical surfaces. This product can be used on bleached wood. This PU multicoat lacquer is free from phthalate plasticisers and suitable as a coating for children's toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For all interior fittings, including in kitchens and bathrooms. A product for coatings with the highest demands on fill and sophistication.

Technical specifications

Appearance colourless
Density series kg/l 0.907 - 0.912
Flow time (+/- 15 %) 29 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 23 - 25
VOC EU % 75.419998 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 450 g/m²
Mixing ratio (by volume) 10 : 1 PU Hardener DR 4070
Mixing ratio (gravimetric) 100 : 10 PU Hardener DR 4070

Information on use

Usage time 8 h / 20 °C
Pot life 8 h / 20 °C
Drying 2 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application
Substrate sanding grits from-to 150 -180
Lacquer sanding (grit) from - to 280 - 320
Finishing Coat with products from the same series after drying and lacquer sanding.
Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions The product can as necessary be mixed at a mixing ratio (by volume) of 5 : 1 with DR 4070 and at a mixing ratio (by volume) of 10 : 1 with DR 4071 to optimise its chemical and mechanical resistance.
Particular instructions Pre-priming is possible depending on the desired finish and substrate using, for example, Hesse Primers DG 4720-0001, DG 4741-0001, DG 4734, DG 4717-0004, DG 4768-0004 and DG 4768-0009. The PU multicoat lacquer is suitable for top coating of Hesse UNA-COLOR and thus provides an excellent ring strength.
General instructions on workmanship PU lacquers should not be applied or dried at material and room temperatures below 18 °C and 40 % RH, ideal values: 20 - 25 °C and 50 - 65 % RH. Deviations lead to problems with drying and/or curing. To avoid adhesion problems, please gently sand back the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Mixed residues from the previous day must only be used as a 10 - 20 % aggregate in a fresh lacquer/hardener mixture. Old lacquer/hardener mixtures impair the surface quality (adhesion/stability). Freshly bleached wood must be allowed at least 48 h intermediate drying / 20 °C before recoating with PU lacquers. The final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature).
Please conduct a sample coating under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.