Hesse PU Acryl-brillant lacquer DU 45229

  • light fast, therefore perfectly suited for colour coating
  • can be used on bleached woods
  • can be polished and buffed with very little effort
DU 45229 is ideally suited for clear and high gloss finishing of colour lacquer surfaces. This high gloss lacquer is 100 % light fast and can be quickly polished or buffed using customary machines. It can also be used on natural and bleached woods with peroxide-resistant PU base coats.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

DU 45229 can be used for shopfitting and on all interior fixtures and fittings, including in kitchens and bathrooms as well as for coatings in ship interiors.

Technical specifications

Appearance colourless
Density series kg/l 0.978
Flow time (+/- 15 %) 30 s / DIN EN ISO 2431 - 4 mm
Form of delivery fluid
Non-volatile content series % 38.7
VOC EU % 61.26 %
Number of coats (max) 3
Amount per layer (minimum) 80 g/m²
Amount per layer (max) 150 g/m²
Total application volume 300 g/m²
Mixing ratio (by volume) 2 : 1 PUR Hardener DR 4005
Mixing ratio (gravimetric) 100 : 50 PUR Hardener DR 4005

Information on use

Usage time 2 - 3 h / 20 °C
Pot life 4 h / 20 °C
Drying 21 h / 20 °C
Stackable after > 48 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation

On suitable Hesse PU coloured lacquers and primers. Prior to application, the surface must be sanded, clean and free of grease.
Substrate sanding grits from-to 400 - 800
Finishing After sufficient drying time and intermediate sanding, another coat of the same.
Yield per coat 7 - 12 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 40 °C
Working temperature 22 °C
Working viscosity 15 s in 4mm / 20 °C
Processing instructions When being used as a flame-retardant coating agent for seagoing vessels, the maximum total application amount is 120 g/m².
Hesse PU Acrylate brilliant lacquer DU 45229 can be polished to a high gloss after 48 h / 20 °C, or after 16 h / 30 - 35 °C. Should a high gloss surface with particular scratch resistance be required, we recommend the use of our transparent high gloss ADAMANT DU 48999 lacquer. Please note the separate technical information on this product.
Particular instructions When used as a flame-retardant coating agent for ocean-going vessels this product is only compatible with other technically suitable and approved products. Pre-priming is possible, depending on the surface requirements and the substrate e. g. with Hesse basecoats DG 417, 4717-0005 and the Hesse PU Coloured lacquers DB 555-(colour tone) and DB 4524x(gloss level)-(colour tone). On bleached surfaces, combination with the PU Basecoats DG 417 and DG 4717-0005 is recommended.
“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Sideboard in high gloss stone grey, unpolished
Substrate: laminated MDF
Laminate sanding: 320 - 400 grit
Edge and profile sanding: 150 - 180 grit (dust removal)
Basecoat: 1 x 150 - 200 g/m² Hesse PU Isolation primer DP 491-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 405 and addition of 10 - 15 % Thinner DV 4935 to the lacquer/hardener mixture
Drying: at least 5 h / 20 °C, preferably 16 h / 20 °C
Primer sanding: 320 - 400 grit (dust removal)
Basecoat: 1 x 150 - 200 g/m² Hesse PU Isolation primer DP 491-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 405 and the addition of 10 - 15 % Thinner DV 4935 to the lacquer/hardener mixture
Drying: at least 5 h / 20 °C, preferably 16 h / 20 °C
Primer sanding: 320 - 400 grit (dust removal)
Colour lacquering: 1 x 120 - 150 g/m² Hesse UNA-COLOR DB 555-7030, mixing ratio (by volume) 10 : 1 with PU Hardener DR 470 and addition of 10 - 20 % Thinner DV 490 to the lacquer/hardener mixture
Drying: at least 5 h / 20 °C, preferably 16 h / 20 °C
Colour lacquer sanding: smoothing using 400 / 600 grit is required after an intermediate drying time of > 5 h / 20 °C!
High gloss lacquering: 2 x 90 - 120 g/m² with intermediate drying of 30 - 60 min / 20 °C using Hesse PU Acrylic-Brilliant lacquer DU 45229, mixing ratio (by volume) 2 : 1 with DR 4005 and the addition of 20 - 40 % Thinner DV 4935 to the lacquer/hardener mixture
Drying: > 48 h / 20 °C

Safety Data Sheets / Certificates

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.