Hesse PU Multicoat Lacquer DE 4555x(gloss level)-0008 brightening

  • Lightening
  • fast-drying
  • with light protection
Two-component PU acrylate resin lacquer, levelling, lightening, fast drying, light fast and formulated with light protection. A multicoat lacquer for base and top coats for open-pore structures. This product can be used on bleached woods. Moreover, it is free from phthalate softeners, so that it is also suitable for coating children's toys.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

In the entire interior and for equalisation of grit defects, for example in cherry wood, or for preservation of natural wood tones such as, for example, oak, conifers and wenge wood.

Technical specifications

Appearance colourless
Density series kg/l 0.897 - 0.906
Flow time 52 s / DIN EN ISO 2431 - 4 mm
Form of delivery fluid
Non-volatile content series % 15.4 - 15.6
VOC EU % 84.38 %
Number of coats (max) 2
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 300 g/m²
Mixing ratio (by volume) 10 : 1 PU Hardener DR 4070
Mixing ratio (gravimetric) 100 : 10 PU Hardener DR 4070

Information on use

Usage time 8 h / 20 °C
Pot life 3 d / 20 °C
Drying 45 min / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application.
Substrate sanding grits from-to 100 - 150
Intermediate sanding (grits) from-to 280 - 320
Finishing With another coat of the same. A one-off coating with another layer of PU lacquer is possible after a minimum of 48 h intermediate drying at 20 °C.
Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Particular instructions

The equalising effect is only obtained by direct coating of the wood. Do not sand through the lacquer product! For an additionally strong brightening effect, please apply Hesse PU Natural Wood Effect DE 42900-0003. After suitable drying (at least 48 h / 20 °C) and correct sanding, DE 45550-0008, 1 x can be coated over, for example with Hesse PU Multicoat lacquer DE 4259x(gloss level) or Hesse PU Multicoat lacquer DE 4503x(gloss level).

General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Pine/fir cupboard wall unit, dull matt
Basecoat: 1 x 100 - 120 g/m² Hesse PU Multicoat lacquer DE 45550-0008, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070
Intermediate drying: 30 - 60 min / 20 °C,
Lacquer sanding: 280 - 320 grit (dust removal)
Top coat: 1 x 100 - 120 g/m² Hesse PU Multicoat lacquer DE 45550-0008, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070
Packable: after at least 16 h / 20 °C

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.