Hesse PU multicoat lacquer DE 42590-0007 extra matt

  • extra matt lacquer formulation
  • light fast so can be used on light wood species
  • With light protection
  • flame-retardant according to DIN 4102-B1.
  • flame-retardant according to French standard; M1
  • Can also be used for coating glass
Hesse PU Multicoat lacquer "extra matt" DE 42590-0007 is a transparent, two-component PU lacquer with an acrylate-resin base. This product is resistant, light fast and formulated with light protection. It can be used on bleached woods. It also meets French test standard M1 (fire behaviour) as well as the test certificate for flame retardance according to DIN 4102 B1.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

DE 42590-0007 can be used in restaurants, kitchens and bathrooms. The product is suitable for surfaces needing the highest resistance to chemical and mechanical demands. It can also be applied on wenge, even if the wood has been bleached and stained. In parallel DE 42590-0007  be used in different hardening versions depending on use. Detailed information on this can be found under the “application instructions” in this technical information.

Technical specifications

Appearance colourless
Density series kg/l 0.934
Flow time (+/- 15 %) 30 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 25
Proportion of renewable raw materials % 0.3
VOC EU % 74.849998 %
Number of coats (max) 3
Amount per layer (minimum) 100 g/m²
Amount per layer (max) 150 g/m²
Total application volume 450 g/m²
Mixing ratio (by volume) 10 : 1 PU Hardener DR 4070
Mixing ratio (gravimetric) 100 : 10 PU Hardener DR 4070

Information on use

Usage time 8 h / 20 °C
Pot life 3 d / 20 °C
Drying 2 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application.
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 280 - 320
Finishing After sufficient drying time and intermediate sanding, another coat of the same.
Yield per coat 6 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions Hardening the lacquer / hardener mixture (by volume) at 5 : 1 with PU Hardener DR 4070 or 10 : 1 with PU Hardener DR 4071 is advisable for coating critical substrates or to optimise chemical and mechanical resistance. Hardening the lacquer / hardener mixture (by volume) at 5 : 1 with PU Hardener DR 4076-0001 after prior mixing of 5 % glass lacquer additive EL 460-0025 to the lacquer components also enables direct lacquering on glass. The glass surface to be lacquered should be cleaned properly beforehand using Hesse Glass cleaner ZD 101.
Particular instructions Please do not use the extra matt formulation DE 42590-0007 as a multicoat lacquer, only as a 1-layer cover coat! Hesse PU Multicoat lacquer "extra matt" DE 42590-0007 is perfectly suited for coating onto Hesse PU Coloured lacquer DB 4524x(gloss level)-(colour tone) giving an elegant matt appearance combined with the required metal-marking resistance. Hesse PU Coloured lacquer DB 4524x(gloss level)-(colour tone) can also be used to tone down Hesse PU Multicoat lacquer "extra matt" DE 42590-0007. Pre-priming is possible depending on the desired surface finish and substrate material, e.g. with the DE 4259x(gloss level) range or Hesse basecoats DG 4741, DG 4734, DG 4717-0004, DG 4768-0004 and DG 4763.
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Pharmacy fit-out in natural rosewood, open-pored, very matt finish
Basecoat: 1 x 100 - 150 g/m² / 20 °C room temperature Hesse PU Multicoat lacquer DE 42597, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070
Intermediate drying: 2 h / 20 °C Intermediate sanding: 280 - 320 grit (dust removal)
Top coat: 1 x 100 - 150 g/m² / 20 °C room temperature Hesse PU Multicoat lacquer "extra matt" DE 42590-0007, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070
Packable: after at least 16 h / 20 °C


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.