Hesse FANTASTIC-CLEAR ULTRAMATT DE 48770-0

  • ultra matt < 3 % gloss
  • velvety-soft feel
  • universally usable, even for heavily frequented areas
  • can be used for high chemical and mechanical resistance on bleached woods
FANTASTIC-CLEAR ULTRAMATT is a light fast, transparent and extremely matt acrylate-based multicoat lacquer. Its versatile application options on all common woods and its ease of use mean that FANTASTIC-CLEAR ULTRAMATT is outstanding as a multicoat or finishing lacquer on top of Hesse polyurethane basecoats. It is an ideally matched combination product as an ultra-matt finishing lacquer on FANTASTIC-COLOR and gives a remarkable velvety feel to the surface. Application of FANTASTIC-CLEAR ULTRAMATT even on bleached woods is also possible.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

FANTASTIC-CLEAR ULTRAMATT is a high quality PU lacquer for all interior and shop fittings; it can also be used for coatings in kitchens and bathrooms.

Technical specifications

Appearance colourless
Density series kg/l 0.941
Flow time (+/- 15 %) 30 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 26.5
VOC EU % 73.46 %
Number of coats (max) 3
Amount per layer (minimum) 120 g/m²
Amount per layer (max) 200 g/m²
Total application volume 400 g/m²
Mixing ratio (by volume) 10 : 1 PU Hardener DR 4071
Mixing ratio (gravimetric) 100 : 10 PU Hardener DR 4071

Information on use

Usage time 8 h / 20 °C
Pot life 1 d / 20 °C
Drying 2.5 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean, dry wood, dependent upon wood type and method of application.
Substrate sanding grits from-to 150 - 400
Lacquer sanding (grit) from - to 280 - 400
Finishing After sufficient drying and immediately after interim sanding with lacquer from the same product range.
Yield per coat 5 - 8 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Processing instructions FANTASTIC-CLEAR ULTRAMATT can optionally be applied in a mixing ratio (by volume) of 5 : 1 with PU Hardener DR 470 / DR 4070. Drying time may be extended in this mixing ratio. Apply a trial coating under practical conditions as necessary.
This product is only suitable as a flame retardant coating for seagoing vessels when the default hardening is used, not the optional hardenings!
Particular instructions Colour lacquers UNA-COLOR and FANTASTIC-COLOR can be used to tint FANTASTIC-CLEAR ULTRAMATT as a glazing lacquer (maximum addition 1.5 %). Depending on the required surface and carrier material, the following Hesse basecoats can be used together with FANTASTIC-CLEAR ULTAMATT: Hesse DG 434 / DG 4734, DG 417 / DG 4717-0005, DG 468-1 / DG 4768-0011 and DG 4750.
“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Conference room cabinet front in natural walnut, ultra-matt
Wood sanding: 150 - 180 grit (dust removal)
Basecoat: 1 x 100 - 150 g/m² Hesse FANTASTIC-CLEAR ULTRAMATT DE 48770-0, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 and the addition of 20 - 25 % Thinner DV 4900 to the lacquer/hardener mixture
Intermediate drying: 2 - 3 h / 20 °C
Lacquer sanding: 280 - 320 grit (dust removal)
Top coat: 1 x 100 - 150 g/m² Hesse FANTASTIC-CLEAR ULTRAMATT DE 48770-0, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 and the addition of 20 - 25 % Thinner DV 4900 to the lacquer/hardener mixture
Packable: after at least 16 h / 20 °C


Laminated MDF sideboard in a blueberry colour tone, ultra-matt
Laminate sanding: 320 - 400 grit (dust removal)
Edge/profile sanding: 150 - 180 grit (dust removal)
Basecoat: 1 x 150 - 200 g/m² Hesse FANTASTIC-FILL DP 4755-9343, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 / DR 471 and the addition of 15 % Thinner DV 4900 / DV 490 to the lacquer/hardener mixture;
Drying: > 2 h / 20 °C, preferably 16 h / 20 °C
Filler sanding: 320 - 400 grit (dust removal)
Colour and top coat: 1 x 120 - 180 g/m² Hesse FANTASTIC-COLOR DB 48882-42798, mixing ratio (by volume) 10 : 1 with Hesse PU Hardener DR 4071 / DR 471 and the addition of 10 - 30 % Thinner DV 4900 / DV 490 to the lacquer/hardener mixture
Drying: 30 - 60 min / 20 °C
Top coat: 1 x 100 - 150 g/m² Hesse FANTASTIC-CLEAR ULTRAMATT DE 48770-0, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 and the addition of 20 - 25 % Thinner DV 4900 to the lacquer/hardener mixture
Packable after at least 16 h / 20 °C

Safety Data Sheets / Certificates

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.