Fields of application
For all interior use.
Technical specifications
Appearance |
colourless
|
Density series kg/l |
0.982 - 0.994
|
Flow time (+/- 15 %) |
45 s / DIN EN ISO 2431 - 4 mm
|
Form of delivery |
fluid
|
Non-volatile content series % |
38 - 39
|
VOC EU % |
60.240002 %
|
Number of coats (max) |
3
|
Amount per layer (minimum) |
100 g/m²
|
Amount per layer (max) |
150 g/m²
|
Total application volume |
450 g/m²
|
Information on use
Drying |
16 h / 20 °C
|
Complete drying |
7 d / 20 °C
|
Surface preparation |
Clean, dry wood, dependent upon wood type and method of application
|
Substrate sanding grits from-to |
150 - 180
|
Lacquer sanding (grit) from - to |
240 - 320
|
Finishing |
After drying and sanding only with varnish material of the same range.
|
Yield per coat |
7 - 10 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
Storage temperature |
16 - 25 °C
|
Working temperature |
20 °C
|
Working viscosity |
22 s / ISO 4mm / 20 °C
|
Processing instructions |
Drying at > 16 h / 20 °C must be observed within the lacquering workflow! It is advisable to use aromatics-free Thinner DV 4981 to achieve the correct viscosity for application using a lacquer roller or for brushing. Thinner DV 4994 should be used to achieve the correct consistency for spray application.
|
Particular instructions |
Do not use the product on light or non-wood stained woods! Use on bleached surfaces is not possible! Air humidity during treatment of at least 50 %. Minimum temperature 18 °C. At lower air humidity and temperature, loss of surface quality is possible. Ensure airtight closure of opened containers immediately after extraction because the contents react with humidity in the air and thicken. Turn the container on its head for a short time. Clean working equipment immediately!
|
General instructions on workmanship |
Brush application or using a lint-free roller (e.g. short mohair). Use sticky tape to remove any loose hairs on the roller prior to first use. Rapid rolling prevents inconsistencies. It is advisable to work with the grain of the wood.
|
The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.