Hesse PU Brillant-Color DB 449-(colour tone)

  • impressive lacquer distribution
  • dries to be particularly brilliant
  • can be polished and buffed with very little effort
DB 449-(colour tone) is a coloured high gloss lacquer with impressive lacquer distribution. This product has good body and dries to be very brilliant and high gloss, combined with optimal sanding and polishing properties. Our coloured high gloss lacquer is available in virtually all colour tones.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

DB 449-(colour tone) can be used for shopfitting and on all interior fixtures and fittings, including in kitchens and bathrooms as well as for coatings in ship interiors.

Technical specifications

Yield per coat 9 - 16 m²/l

The spreading rate is heavily dependent on the type of application. The specified theoretic spreading rate reduces by up to 40 % with spray applications. Brushing or manual application methods are virtually loss-free. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Appearance opaque
Density series kg/l 1.001 - 1.236
Flow time 22 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 45.3 - 61.3
Profile of properties Can be polished
VOC EU % 45.73 %
Number of coats (max) 4
Amount per layer (minimum) 70 g/m²
Amount per layer (max) 130 g/m²
Total application volume 350 g/m²
Mixing ratio (by volume) 2 : 1 PUR Hardener DR 404
Mixing ratio (gravimetric) 100 : 47 PUR Hardener DR 404

Information on use

Usage time 2 - 3 h / 20 °C
Pot life 4 h / 20 °C
Drying 16 h / 20 °C
Stackable after > 72 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation

Cleaning by sanding on foil or melamine
Substrate sanding grits from-to 320 - 400
Intermediate lacquer sanding (grits) from-to 400 - 800
Finishing On your own, immediately after an intensive sanding.
Working temperature 20 °C
Particular instructions Please also see the additional special technical information on "Polishing and Buffing". Pre-priming is possible depending on the desired surface-finish and substrate, for example with Hesse PU Isolation primer DP 491-9343 or Hesse PU Isolation primer DP 491-9005. An intermediate coating with Hesse UNA-COLOR DB 555-(colour tone) in the same colour tone as the selected Hesse PU Brilliant colour DB 449-(colour tone), applied between filler and high-gloss, has a positive influence on the condition of the high gloss coating!
“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU lacquers should not be applied or dried at material and room temperatures of less than 18 °C and 40 % RH, ideal values: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or curing faults. To avoid adhesion problems, please sand PU lacquered surfaces before applying fresh lacquer and apply lacquer to these sanded surfaces as soon as possible. Old lacquer/hardener mixtures will affect the surface quality (adhesion/resistance). If stored correctly (at least 20 °C room temperature), complete hardening of the coating is achieved after a week. Please apply a test coat under real conditions!

Display cabinet made from laminated MDF in black high-gloss
Laminate sanding: 320 grit (dust removal)
Base coat: 1 x 150 - 200 g/m² Hesse PU Isolation primer DP 491-9005, mixing ratio (by volume) 4 : 1 with PU Hardener DR 405, thinner: 5 - 10 % DV 490
Drying: at least 16 h / 20 °C
Lacquer-sanding: in stages through 320 - 600 grit (dust removal)
Top coat: 2 x 80 - 120 g/m² Hesse PU Brilliant Colour DB 449-9005 with short intermediate drying (20 - 30 min / 20 °C room temperature).
Mixing ratio 2 : 1 by volume with PU hardener DR 404 and 30 % Thinner DV 4935
Packable and ready to polish after 3 days / 20 °C

Safety Data Sheets / Certificates

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.