Hesse PU Brillant-Colour DB 44099-(colour tone)

  • impressive lacquer distribution
  • dries to be particularly brilliant
  • can be polished and buffed with very little effort
DB 44099-(colour tone) is a coloured high gloss lacquer with impressive lacquer distribution. This product has good body and dries to be very brilliant and high gloss, combined with optimal sanding and polishing properties. Our coloured high gloss lacquer is available in virtually all colour tones.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

DB 44099-(colour tone) can be used for all interior fixtures and fittings, including in kitchens and bathrooms as well as for coatings in ship interiors.

Technical specifications

Appearance opaque
Density series kg/l 0.997 - 1.622
Flow time (+/- 15 %) 45 s / DIN EN ISO 2431 - 4 mm
Form of delivery fluid
Non-volatile content series % 0 - 73.8
Profile of properties Can be polished
Proportion of renewable raw materials % 0 - 0.77
VOC EU % 54.439999 %
Number of coats (max) 4
Amount per layer (minimum) 70 g/m²
Amount per layer (max) 130 g/m²
Total application volume 350 g/m²
Mixing ratio (by volume) 2 : 1 PUR Hardener DR 4080
Mixing ratio (gravimetric) 100 : 52 PUR Hardener DR 4080

Information on use

Usage time 2 - 3 h / 20 °C
Pot life 4 h / 20 °C
Drying 16 h / 20 °C
Stackable after > 72 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Clean with a sanding pass on film and melamine.
Substrate sanding grits from-to 320 - 400
Lacquer sanding (grit) from - to 400 - 800
Finishing With itself, immediately after an intensive sanding.
Yield per coat 10 - 19 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Working viscosity 16 s in 4mm
Particular instructions Please also note the separate technical information on “Polishing/Buffing”. Pre-priming is possible depending on the substrate material and desired surface, for instance using Hesse PU Isolating filler DP 4791-9343, FANTASTIC-FILL DP 4755-9343 or FANTASTIC-FILL DP 4755-9005. An intermediate coat of Hesse UNA-COLOR DB 45245-(colour tone) applied between filler and high gloss in the same colour tone as the selected Hesse PU Brilliant lacquer DB 44099-(colour tone) greatly improves the outcome of the high gloss structure! “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship PU paints should not be applied or dried at material and room temperatures of below 18 °C or relative humidity of below 40 %, ideal values: 20 - 25 °C, 50 - 65 % RH. Deviations from these guidelines may lead to problems with drying or hardening. Any mixed lacquer left over from the previous day should only be used as a 10 - 20 % proportion added to a fresh mixture of lacquer and hardener. Old lacquer/hardener mixtures impair the surface quality (bonding/resilience). Freshly bleached woods must undergo intermediate drying for at least 48 h / 20 °C before overpainting with PU lacquers. The final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature). Please apply a test coat under real conditions!

MDF display case, laminated in white, high gloss
Laminate sanding: 320 grit (dust removal)
Basecoat: 1 x 150 - 200 g/m² Hesse PU Isolating filler DP 4791-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4058 and the addition of 10 – 15 % Thinner DV 4935 in relation to the lacquer/hardener mixture
Drying: at least 16 h / 20 °C
Lacquer sanding: graduated from 320 - 600 grit (dust removal)
Top coat: 2 x 80 - 120 g/m² Hesse PU Brilliant lacquer DB 44099-9010 with brief intermediate drying (20 - 30 min / 20 °C room temperature), mixing ratio (by volume) 2 : 1 with PU Hardener DR 4080 and the addition of 30 % Thinner DV 4935 in relation to the lacquer/hardener mixture
Ready for packaging / polishing: after 3 d / 20 °C


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.