Hesse PU Metallic Glass lacquer DB 4207-(gloss level)-(colour tone)

  • direct coating with outstanding adhesion on glass
  • uniform colour effect
  • [can be used for coating behind glass in shower cabinets]
  • available in many different colour tones
DB 4207x(gloss level)-(colour tone) is a coloured metallic glass lacquer for direct coating on cleaned glass surfaces. This light fast product with good coverage dries to create a uniformeffect and is available in virtually all metallic colour tones.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

DB 4207x(gloss level)-(colour tone) is ideally suited for all interior fixtures and fittings, shopfitting and furniture making.

Technical specifications

Appearance opaque
Density series kg/l 0.907 - 1.003
Flow time (+/- 15 %) 50 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 12 - 36
VOC EU % 73.040001 %
Number of coats (max) 3
Amount per layer (minimum) 80 g/m²
Amount per layer (max) 150 g/m²
Total application volume 400 g/m²
Mixing ratio (by volume) 5 : 1 PU Hardener DR 4076-0001
Mixing ratio (gravimetric) 100 : 21 PU Hardener DR 4076-0001

Information on use

Usage time 8 h / 20 °C
Pot life 1 d / 20 °C
Drying 16 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation Substrate preparation is decisive for adhesion of the coating. The glass surface to be coated must be clean and grease-free. Use Hesse Cleaning thinner ZD 101 to carefully clean the surface prior to application.
Yield per coat 6 - 12 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Particular instructions Metallic lacquers must always be applied evenly. Application quantities, application methods and drying conditions can influence the colour tone and effect. When painting on metal, if necessary, perform a test coating!
General instructions on workmanship PU lacquers should not be applied or dried at material and room temperatures of less than 18 °C and 40 % RH, ideal values: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or curing faults. To avoid adhesion problems, please sand PU lacquered surfaces before applying fresh lacquer and apply lacquer to these sanded surfaces as soon as possible. Old lacquer/hardener mixtures will affect the surface quality (adhesion/resistance). If stored correctly (at least 20 °C room temperature), complete hardening of the coating is achieved after a week. Please apply a test coat under real conditions!

Glass partition in M19181 metallic tone to customer specification.
Surface preparation: carefully clean the glass and remove grease using ZD 101
Coating: 1 x 130 - 150 g/m² Hesse PU Glass colour lacquer DB 42074-M19181, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001, Thinner: 10 % DV 4900
Packable: at least 16 h / 20 °C
Installation or bonding: 5 d / 20 °C


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.