Hesse PU Desert look DB 46031-(colour tone)

  • Desert look effect
The colour tone selection and visual perception of the Hesse PU Desert look is intended to represent an individual sand texture.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For interior fittings, shop fittings and furniture construction, wherever the surface demands special optical and haptic requirements.

Technical specifications

Appearance opaque
Density series kg/l 1.021 - 1.081
Flow time (+/- 15 %) 55 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 40.7 - 41.8
VOC EU % 58.65 %
Number of coats (max) 1
Amount per layer (minimum) 120 g/m²
Amount per layer (max) 150 g/m²
Total application volume 150 g/m²
Mixing ratio (by volume) 10 : 1 PU Hardener DR 4070
Mixing ratio (gravimetric) 100 : 9 PU Hardener DR 4070

Information on use

Usage time 8 h / 20 °C
Pot life 8 h / 20 °C
Drying 3 h / 20 °C
Stackable after > 16 h / 20 °C
Complete drying 7 d / 20 °C
Surface preparation After lacquer sanding, within 8 h / 20 °C, on the following Hesse PU primer characteristics: DP 4755-9343 and DP 4791-9343.
Substrate sanding grits from-to 320 - 400
Finishing With another coat of the same. If complete ring resistance and abrasion resistance, or a different gloss level, is required, then please use Hesse PU Multicoat lacquer DE 4503x(gloss level) or DE 4259x(gloss level) for the final coat.
Yield per coat 7 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 16 - 25 °C
Working temperature 20 °C
Processing instructions With direct coating on cleaned or sanded foils, please carry out trial painting if necessary to check the adhesion!
Particular instructions Different working modes and machine settings within an object result in differences in the color and effect created. Please test the lacquer under real conditions, if necessary.
General instructions on workmanship PU lacquers should not be applied and dried at material and room-temperatures below 18 °C and 40 % RH. Ideal values are: 20 - 25 °C, 50 - 65 % RH. Deviations will result in drying or hardening errors. In order to avoid adhesion problems, please sand the PU lacquered surfaces before applying fresh lacquer and apply lacquer to the sanded surfaces as soon as possible. Old lacquer and hardener mixtures affect the surface quality (adhesion/resistance). Freshly bleached substrates must undergo intermediate drying for at least 48 h at 20 °C before coating with suitable PU lacquers. If stored correctly (at least 20 °C room temperature), the final hardness of the coating is achieved after a week.
Please apply a test coat under real conditions!

Wall cladding with a desert look effect
Substrate material: laminated MDF
Edge and profile sanding: 150 - 180 grit (dust removal)
Laminate sanding: 320 - 400 grit (dust removal)
Base coat: 150 x 180 g/m² Hesse EASY-FILL DP 4788-9343, mixing ratio 100 : 15 (by volume) with PU Hardener DR 4096-0002, addition of 10 % Thinner DV 4900 to the lacquer/hardener mixture
Drying: 5 h / 20 °C, better 16 h / 20 °C
Filler sanding: 320 - 400 grit (dust removal)
Application of 120 x 150 g/m², Hesse PU Desert look effect DB 46031-8001, mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070, addition of 10 - 15 % Thinner DV 4900 to the lacquer/hardener mixture
Drying: 5 min / 20 °C
Application of 60 - 100 g/m² Hesse PU Desert look effect DB 46031-8001, mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070 with the cup gun and reduced spray pressure (0.5 - 1.0 bar). The spray pressure, nozzle size selection and working viscosity all affect the particle size and the effect.
Drying: 30 min / 20 °C
Application of 60 - 100 g/m² Hesse PU Desert look effect DB 46031-8008, mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070 with the cup gun and reduced spray pressure (0.5 - 1.0 bar). The spray pressure, nozzle size selection and working viscosity all affect the particle size and the effect.
Drying: 30 min / 20 °C
Application of 60 - 100 g/m² Hesse PU Desert look effect DB 46031-1013, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 with the cup gun and reduced spray pressure (0.5 - 1.0 bar). The spray pressure, nozzle size selection and working viscosity all affect the particle size and the effect.
Drying: 16 h / 20 °C

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.