Hesse UV Basecoat for roller coating UG 7324 clear, mat

  • for achieving very matt surfaces
  • extra matt base coat
Hesse Roller base is a UV-curing product based on unsaturated polyester resins, colourless, universally applicable, ready-to-use and with good sanding properties. A base coat for open-pore, matt structures.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For use as a universal primer to coat residential furniture with an appropriate top coat in the system structure. Also suitable for the industrial coating of parquet flooring and doors.

Technical specifications

Appearance colourless
Density series kg/l 1.291
Flow time (+/- 15 %) 85 s / DIN 53211 - 6 mm
Form of delivery fluid
Non-volatile content series % 99
VOC EU % 1.05 %
Number of coats (max) 3
Amount per layer (minimum) 10 g/m²
Amount per layer (max) 30 g/m²
Total application volume 80 g/m²

Information on use

Curing Forward feed 15 m/min
Gelling: 1 UV HG lamp 80 W/cm
UV curing: 3 UV HG lamps 80 W/cm
Substrate sanding grits from-to 150 - 180
Lacquer sanding (grit) from - to 320 - 400
Comments on sanding The quality and uniformity of the substrate and lacquer sanding are crucial to the final surface quality. After sanding, remove dust as prescribed.
Yield per coat 43 - 129 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 5 - 25 °C
conditions of transport frost-free - up to a maximum of 35 °C
Particular instructions It can be recoated using Hesse UV Top coats after gelling or UV activation and fresh sanding.
General instructions on workmanship Clean spotlights and reflectors regularly with a soft, lint-free cloth and UV 7111.
Only touch spotlights with cotton gloves. Observe the operating h of the spotlights and replace spotlights according to the manufacturer's recommendations. Always protect open containers from incident light (cover).
Close containers properly after use.
Sufficient intermediate sanding and an inspection of the adhesion in the complete coating is always required. Please test the lacquer under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Safety Data Sheets / Certificates

Material Safety Data Sheets


Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.