For parquet- and furniture coatings as a universally applicable primer with suitable top coat in a system-oriented construction.
| Appearance | colourless |
| Flow time (+/- 15 %) | 95 s / DIN 53211 - 8 mm |
| Form of delivery | fluid |
| VOC EU % | 0.43 % |
| Number of coats (max) | 3 |
| Amount per layer (minimum) | 10 g/m² |
| Amount per layer (max) | 30 g/m² |
| Total application volume | 80 g/m² |
| Curing |
Forward feed 15 m/min Gelling: 1 UV HG lamp 80 W/cm UV curing: 3 UV HG lamps 80 W/cm |
| Substrate sanding grits from-to | 150 - 180 |
| Lacquer sanding (grit) from - to | 320 - 400 |
| Comments on sanding | The quality and uniformity of the substrate and lacquer sanding are crucial to the final surface quality. After sanding, remove dust as prescribed. |
| Working Temperature Range | 20 - 40 °C |
| Storage temperature | 10 - 35 °C |
| conditions of transport | frost-free - up to a maximum of 35 °C |
| General instructions on workmanship | Regularly clean lamps and reflectors with a soft, lint-free cloth and UV 7111. Only touch the lamps with cotton gloves. Pay attention to the h of operation for the lamps and change them according to the manufacturer's recommendation. Always shield opened containers from light (cover). Close tightly after use! In any case, sufficient interim sanding and an adhesion test on the complete construction is required. Please make a test coating under practical working conditions! |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.