Hesse UV Adhesion primer UG 7002 clear

  • ideal as a primer with superb adhesion
  • for melamine resin laminates
UV-activated adhesion primer based on unsaturated acrylic resins, clear, ready-to-use. Basecoat for roller application to achieve open- to closed pore finishes.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For all interior fittings and for coating furniture as an adhesion primer on melamine foils with a suitable top coat as part of a system structure.

Technical specifications

Appearance colourless
Density series kg/l 1.014
Flow time (+/- 15 %) 80 s / DIN 53211 - 6 mm
Form of delivery fluid
Non-volatile content series % 99.6
VOC EU % 0 %
Number of coats (max) 1
Amount per layer (minimum) 8 g/m²
Amount per layer (max) 15 g/m²
Total application volume 15 g/m²

Information on use

Curing Forward feed 15 m/min
Gelling: 1 UV HG lamp 80 W/cm
UV curing: 3 UV HG lamps 80 W/cm
Substrate sanding grits from-to 150 - 180
Finishing After gelling without intermediate sanding recoatable with UV-products, which are adjusted to purpose and coating line, see "coatings process sheet"
Yield per coat 68 - 127 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 5 - 25 °C
conditions of transport frost-free - up to a maximum of 35 °C
General instructions on workmanship Clean lamps and reflectors on a regular basis using a soft, lint-free cloth and UV 7111.
Only touch the lamps when wearing cotton gloves. Note the lamp's operating hours and replace them as per the lamp manufacturer's recommendations. Always protect open containers from the incidence of light (cover them).
Seal containers properly after use.
Sufficient lacquer sanding and inspection of the bond within the entire structure will be required in each case. Please apply a trial coating under practical conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Safety Data Sheets / Certificates

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.