Hesse HYDRO Peel-off lacque HA 6620-(colour tone)

  • water soluble and water reducible
  • Fast-drying
  • easily removed from the substrate after drying
Strip lacquer based on water soluble polymers, removable without residues after drying. Protective lacquer for the widest variety of substrates, plus for equipping dry spray booths and spray areas.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

As a protective coating for a wide variety of substrates in the furniture industry. since it is easy to remove from the substrate it is used as an easily removable film in dry spray booths and spray areas, making cleaning easier. It can also be used as a temporary protective film for coated surfaces.

Technical specifications

Appearance glazing
Density series kg/l 0.988
Flow time (+/- 15 %) 60 s / DIN 53211 - 8 mm
Form of delivery Very viscous
Non-volatile content series % 12.1
VOC EU % 16.48 %

Information on use

Stackable after > 16 h / 20 °C
Load bearing after 16 h / 20 °C
Surface preparation The substrate must be dry, dust-free and grease-free.
Comments on sanding In our experience, it is no longer so easy to remove the strip lacquer without leaving residues once the substrate has been sanded.
Storage temperature 10 - 40 °C
conditions of transport 10 - 30 °C
Processing instructions Stir carefully before use. Please observe the latest material safety data sheet!
Particular instructions Not suitable for water-curtain spray booths! For spray application please dilute beforehand with up to 10 % water! Then stir the mixture well by hand! Special rollers are required for roller application! Suitability of the product for use as a protective coating over lacquered surfaces must be tested under real conditions! Clean work equipment with water.
General instructions on workmanship Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. When working with HYDRO materials, parts that come into contact with the material must be made from stainless steel. The moisture content should be between 8 - 12 %. Do not apply or dry HYDRO lacquers at material or room temperatures below 18 °C. The ideal humidity for application lies between 55 and 65 %. During the lacquering process, a humidity level that is too low leads to surface defects (such as shrink cracks, etc.). Excessive humidity during the drying phase may drastically lengthen the drying time! In order to avoid adhesion problems, please sand the lacquered surfaces freshly before coating and apply lacquer to the sanded surfaces as soon as possible. When applied to foils, etc., please use a sample coating on the respective substrate to check the adhesion! The ideal complete hardening of lacquered surfaces that have been flashed off is reached at temperatures over 20 °C up to no more than 40 °C. Adequate, draft-free air exchange must be assured. The complete hardening of the lacquer will be reached after one week of proper storage (at least 20 °C room temperature). Woods containing large amounts of natural oils, such as teak, can negatively influence adhesion under certain circumstances. Water-soluble wood ingredients such those in ash and tannins in woods such as oak may cause colour changes and discolourations in the coating. We recommend that you always conduct a sample lacquering to evaluate the colour effect, adhesion and drying process under real conditions!

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.