Hesse PERFECT-COLOR HDB 5434x(gloss level)-(colour tone)

  • easy to apply due to its outstanding levelling
  • for heavy-duty surfaces
  • can be quickly recoated given its short drying times
Our Hesse HYDRO-PUR RESISTCOLOR HDB 5434x(gloss level)-(colour tone) enables you to achieve an excellent colour lacquer surface that not only resists scratches, but also mechanical and chemical loads. The outstanding flow properties of our two-component HYDRO-PUR RESISTCOLOR make it easy to apply. Its rapid complete drying and the option for forced drying ensure that even heavy workpieces are ready for stacking or further applications on the next day. Hesse HYDRO-PUR RESISTCOLOR HDB 5434x(gloss level)-(colour tone) is a light fast multicoat lacquer that is ideal for base and top coats.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

HYDRO-PUR RESISTCOLOR is particularly suitable for industrial coating in the interior fitting and shop fitting sectors and for objects, including doors, bathrooms and kitchens. The colour lacquer is also suitable for reverse glass coating of decorative glass surfaces.

Technical specifications

Appearance opaque
Decopaint basis WB
Decopaint category J
Density series kg/l 1.041 - 1.222
Flow time (+/- 15 %) 35 s / DIN 53211 - 6 mm
Form of delivery fluid
Non-volatile content series % 34 - 48
VOC EU % 4.39 %
Number of coats (max) 2
Amount per layer (minimum) 120 g/m²
Amount per layer (max) 140 g/m²
Total application volume 240 g/m²
Mixing ratio (by volume) 10 : 1 HYDRO Hardener HDR 5091
Mixing ratio (gravimetric) 100 : 10 HYDRO Hardener HDR 5091

Information on use

Usage time 2 h / 20 °C
Drying 9 h / 20 °C
Stackable after 16 h / 20 °C
Complete drying 48 h / 20 °C
Mechanical drying Array
Surface preparation Clean, dry wood, clean suitable foil substrate or matching pigment filler. Free from oil, grease, wax and silicones. Correctly sanded and free from sanding dust.
Substrate sanding grits from-to 120 - 400
Lacquer sanding (grit) from - to 280 - 600
Finishing Subsequent coating: after sufficient drying and sanding back, if required, apply another coat of the same product or suitable HYDRO or PU products.
Comments on sanding The quality and uniformity of the wood / substrate and of the lacquer sanding are crucial to the final surface finish. After sanding, remove dust as prescribed.
Yield per coat 8 - 9 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Working Temperature Range 18 - 22 °C
Storage temperature 10 - 30 °C
conditions of transport 10 - 30 °C
Processing instructions Add hardener slowly whilst stirring and adjust the spray viscosity by adding water or HYDRO Optimizer HZ 70, if required. Maximum additive volume 5 %. The hardener must always be added before thinning! The flow time should not be less than 40 s / DIN 4 mm after hardening and thinning. Never store product mixed with hardener in closed containers. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904.

When being used as a flame-retardant coating material for seagoing vessels, the maximum amount applied wet is 100 g/m².
Particular instructions Pre-priming is possible depending on the required finish and carrier material, for instance using: Hesse COOL-PROTECT HI 6600-9343, Hesse COOL-FILL HP 6645-9343, Hesse 2K HYDRO Pigment filler HDP 5640-9343 und Hesse FANTASTIC-FILL DP 4755-9343. Exotic woods such as Macassar or extremely resinous knotty pine can be pre-primed with either Hesse PUR isolating primer DG 4720-0001 or with Hesse COOL-PROTECT HI 6600-9343.

If using woods rich in active substances (e. g. poplar, Hevea brasiliensis, certain types of knotty pine, exotic woods etc.), the number of isolating coats required and the quality of coating must be determined in advance on the original substrate. When used on staircases (treads) we recommend finishing the colour lacquer surface with Hesse HYDRO-PUR PRIMO HDE 5400x(gloss level) or other Hesse HYDRO staircase lacquers.
HYDRO-PU RESISTCOLOR can also be used in the original mixing ratio for reverse glass coating of decorative glass surfaces. The glass surface must be clean and grease-free before application.
For surfaces with heavy use or direct contact with water, we recommend our special glass lacquer HDB 57485-(colour tone).

“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”
General instructions on workmanship When working with HYDRO materials, parts that come into contact with the material must be made from stainless steel. The moisture content should be between 8 - 12 %. Do not apply or dry HYDRO lacquers at material or room temperatures below 18 °C. The ideal humidity for application lies between 55 and 65 %. During the lacquering process, a humidity level that is too low leads to surface defects (such as shrink cracks, etc.). Excessive humidity during the drying phase may drastically lengthen the drying time! In order to avoid adhesion problems, please sand the lacquered surfaces freshly before coating and apply lacquer to the sanded surfaces as soon as possible. When applied to foils, etc., please use a sample coating on the respective substrate to check the adhesion! The ideal complete hardening of lacquered surfaces that have been flashed off is reached at temperatures over 20 °C up to no more than 40 °C. Adequate, draft-free air exchange must be assured. The complete hardening of the lacquer will be reached after one week of proper storage (at least 20 °C room temperature). Woods containing large amounts of natural oils, such as teak, can negatively influence adhesion under certain circumstances. Water-soluble wood ingredients such those in ash and tannins in woods such as oak may cause colour changes and discolourations in the coating. We recommend that you always conduct a sample lacquering to evaluate the colour effect, adhesion and drying process under real conditions!
Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.