For staining and subsequent coating of furniture, stairs and doors in industrial and craft applications. These stains can be sprayed and then wiped.
| Appearance | glazing |
| Flow time (+/- 15 %) | 60 s / DIN EN ISO 2431 - 3 mm |
| Form of delivery | fluid |
| VOC EU % | 97.919998 % |
| Number of coats (max) | 1 |
| Amount per layer (minimum) | 50 g/m² |
| Amount per layer (max) | 80 g/m² |
| Total application volume | 80 g/m² |
| Drying | 1 h / 20 °C |
| Surface preparation | The wood must be dry, dust-free and grease-free. |
| Substrate sanding grits from-to | 120 - 240 |
| Finishing | You can apply matching Hesse CN, PU or RSE lacquers or Proterra products by spraying, rolling, brushing or flow coating after at least 2 h drying. Finishing with a matching 1C or 2C HYDRO or HYDRO-UV lacquer by spraying or flow coating is possible after 6 h drying. |
| Comments on sanding | A graduated raw wood sanding is recommended. The quality of the sanding is decisive for the quality of the final result. |
| Yield per coat |
0 - 0 m²/l The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner. |
| Storage temperature | 5 - 30 °C |
| Working temperature | 20 °C |
| Processing instructions | Apply stain by spraying or with a brush with excess. Remove the excess evenly first crosswise to the grit then along it using gauze bales. Stir stains well before and during processing. All stains from the same range can be mixed with one another. Can be tinted with colour concentrates in the range: CF 50xx, CP 76xx, CP 70xx . We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are recommended when spraying stains that are subsequently to be wiped. |
| Particular instructions | Lighten by adding: CV 326. Can be tinted with colour concentrates in the range: CF 50xx, CP 70xx, CP 76xx. Stains on the XBK 6 stain card are adjusted for oak and mahogany. Hesse stains are matched to each type of wood in terms of colour tone and application. Additional types of application and woods are available. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.