Hesse Wiping stain TD 4215-(colour) metallic

  • Wiping stain for achieving special effects
  • for coloured emphasis of the pores
  • available in silver, copper, gold and many bright colour tones
Fast drying, solvent-based pore stain used for colour-contrasting emphasis of the pores on woods with coarse pores. Available in silver, copper, gold and many bright colour tones.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For use with subsequent recoating in industry and handcrafting of doors, home furnishings and kitchen furniture.

Technical specifications

Appearance not relevant
Density series kg/l 0.807 - 0.865
Flow time (+/- 15 %) 60 s / DIN EN ISO 2431 - 3 mm
Form of delivery fluid
Non-volatile content series % 8 - 14
VOC EU % 92.099998 %
Number of coats (max) 1
Amount per layer (minimum) 30 g/m²
Amount per layer (max) 60 g/m²
Total application volume 60 g/m²

Information on use

Drying 2 h / 20 °C
Surface preparation The substrate must be dry, dust-free and grease-free.
Finishing After thorough drying, the stains are coated over using light stable Hesse PU lacquers.
Yield per coat 14 - 28 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 5 - 30 °C
Working temperature 20 °C
Processing instructions Prepare the substrate in the desired manner with at least 2 coats of CN or PU coloured or multicoat lacquers or basecoats and allow the last coat to dry for a minimum of 16 h. No sanding required. Apply the wiping stain using a spray gun, brush or balled up cloth. Carefully rub down the coating on the wood with steel wool or sanding fleece after the wiping stain has dried, so that the product only remains in the pores. Remove any remaining haze by slight sanding with 400 grit. Then finish with a top coat of a lacquer from the same system.
Particular instructions All stains from the same range can be mixed with one another.
General instructions on workmanship Trial staining of the original sanded wood with original coating should be carried out under real conditions. Only use stains from a single batch for any one job. Clean instruments with thinners such as ZD 82.

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.