Hesse HYDRO Multi stain WUE 18-(colour tone) for spraying

HYDRO Stain system WUE, ready to use, light-fast for subsequent coating with suitable HYDRO lacquers. Fine-particle pigments allow maximum transparency and brilliance of stain colours. Specifically formulated for beech.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

For furniture making and interior fittings with the usual European hardwood species. This stain is formulated to spray without wiping.

Technical specifications

Appearance glazing
Density series kg/l 1.004 - 1.278
Flow time (+/- 15 %) 60 s / DIN EN ISO 2431 - 3 mm
Form of delivery fluid
Non-volatile content series % 1.3 - 34.8
VOC EU % 1.02 %
Number of coats (max) 1
Amount per layer (minimum) 30 g/m²
Amount per layer (max) 80 g/m²
Total application volume 80 g/m²

Information on use

Drying 2 h / 20 °C
Surface preparation The wood must be dry, dust-free and grease-free.
Substrate sanding grits from-to 120 - 180
Finishing You can apply matching Hesse CN, PU or RSE lacquers or Proterra products by spraying, rolling, brushing or flow coating after at least 2 h drying. Finishing with a matching 1C or 2C HYDRO or HYDRO-UV lacquer by spraying or flow coating is possible after 6 h drying. Complete drying must be guaranteed prior to recoating. Drying is delayed by low temperatures, reduced exchange of air, high humidity and large application amounts.
Comments on sanding A graduated raw wood sanding is recommended. The quality of the sanding is decisive for the quality of the final result. The bare wood can optionally be dampened. After drying overnight, sand or smooth.
Yield per coat 14 - 38 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 5 - 30 °C
Working temperature 20 °C
conditions of transport frost-free - up to a maximum of 35 °C
Processing instructions An even, slightly damp spray application without wiping. Stir stains well before and during processing. The stains can be thinned with water, if required. We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are recommended when spraying stains that are subsequently to be wiped.
Particular instructions Hesse stains are matched to each type of wood in terms of colour tone and application. Additional types of application and woods are available. All stains from the same range can be mixed together. Lighten by adding water. Can be tinted with colour concentrates in the range: BP 30xx, BP 3570. Priming with HYDRO lacquers can result in discolorations when using wood species with a high proportion of water-soluble wood constituents (e.g.oak). We therefore recommend a PU base coat, especially in the case of pastel or white colour tones.
General instructions on workmanship Trial staining of the original sanded wood with original lacquering should be carried out under real conditions. Only use stains from one batch for any one job. Do not pour soiled stains back into the original container. Clean tools with water immediately after use. Dried-on stain residue can be removed with thinners such as ZD 82.

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.