Hesse Gloss stain BU 58-(colour tone) for spraying

  • Appealing wax effect
  • Especially for conifers
  • Used without top coating
BU HYDRO colour stains, ready to use, waxy, environmentally friendly, very effective staining for brushed surface, sand textured or coarsely sanded coniferous wood such as pine and fir. Specifically formulated for conifers.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

This stain is for use in the craft of coating wall and ceiling panelling, which is not heavily used, as it is applied without a lacquer coat.  This stain is formulated to spray without wiping.

Technical specifications

Appearance glazing
Density series kg/l 0.999 - 1.206
Flow time (+/- 15 %) 60 s / DIN EN ISO 2431 - 3 mm
Form of delivery fluid
Non-volatile content series % 0 - 32
VOC EU % 0.31 %
Number of coats (max) 1
Amount per layer (minimum) 30 g/m²
Amount per layer (max) 60 g/m²
Total application volume 60 g/m²

Information on use

Drying 4 h / 20 °C
Surface preparation The wood must be dry, dust-free and grease-free.
Substrate sanding grits from-to 100 - 120
Finishing The surfaces are polished to a gloss after having dried completely. Wax stains may not be re-coated. The drying time can vary depending on temperature, air circulation, humidity levels and application quantity.
Comments on sanding A graduated raw wood sanding is recommended. The quality of the sanding is decisive for the quality of the final result. The bare wood can optionally be dampened. After drying overnight, sand or smooth.
Yield per coat 18 - 37 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Working Temperature Range 16 - 25 °C
Storage temperature 5 - 30 °C
Working temperature 20 °C
conditions of transport frost-free - up to a maximum of 35 °C
Processing instructions Stir stains well before and during processing. Formulated for specific application methods. Apply lightly and evenly by spraying without spreading. Do not forcibly dry. Further details on application, thinning and the like are available on request. We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are recommended when spraying stains that are subsequently to be wiped.
Particular instructions Lighten by adding: BU 58-21500. Stir stains well before and during processing. Saponify resinous woods (e.g. pine, red pine) with Hesse wood soap HBV 243 before staining.
General instructions on workmanship Trial staining of the original sanded wood with original lacquering should be carried out under real conditions. Only use stains from one batch for any one job. Do not pour soiled stains back into the original container. Clean tools with water immediately after use. Dried-on stain residue can be removed with thinners such as ZD 82.

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.