Hesse HYDRO Wiping stain TW 4130-(colour tone)

  • for coloured emphasis of the pores
  • Easy to work
  • for open-pore and structured woods
  • wide range of colour tones
A HYDRO pigment stain that is pasty and water soluble for achieving colour-contrasting emphasis of the pores on open-pored or textured woods.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

In the complete interior fittings, including kitchens and bathrooms for open-pored lacquer structures on coarse-pored types of wood such as ash and oak, top coating/fixing with suitable coating or finishing lacquers required.

Technical specifications

Appearance not relevant
Density series kg/l 1.037 - 1.612
Flow time (+/- 15 %) 23 s / DIN 53211 - 6 mm
Form of delivery fluid
Non-volatile content series % 5.5 - 58.5
VOC EU % 0 %
Number of coats (max) 1
Amount per layer (minimum) 40 g/m²
Amount per layer (max) 80 g/m²
Total application volume 80 g/m²

Information on use

Drying 1 h / 20 °C
Surface preparation The wood must be dry, dust-free and grease-free. The effect is especially distinctive after the pores are brushed out vigorously.
Substrate sanding grits from-to 280 - 400
Finishing Re-coating with suitable Hesse CN or PU lacquers required. Complete drying must be guaranteed prior to recoating. Drying is delayed by low temperatures, reduced exchange of air, high humidity and large application amounts.
Yield per coat 17 - 33 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 5 - 30 °C
Working temperature 20 °C
conditions of transport frost-free - up to a maximum of 35 °C
Processing instructions One-off application by brush, balls or spraying unit on clear or coloured PU or CN lacquers that have been dried for 16 h at at least 20 °C. Remove excess material with a lint-free cloth. Carefully sand down the surface of the wood with steel wool or sanding fleece after the wiping stain has dried so that product only remains in the pores. Remove any remaining haze by sanding down with 400 grit. Dilute the wiping stain with water for spraying. Stir stains well before and during processing.
Particular instructions All stains from the same range can be mixed with one another.Can be tinted with colour concentrates in the range: BP 30xx
General instructions on workmanship Trial staining of the original sanded wood with original lacquering should be carried out under real conditions. Only use stains from one batch for any one job. Do not pour soiled stains back into the original container. Clean tools with water immediately after use. Dried-on stain residue can be removed with thinners such as ZD 82.

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.