Hesse Antique stain WA 58-(colour tone) for spraying

  • Antique stains that are easy to apply
  • to achieve a weathered look to your wood surface
  • System build-up using 2 stains
  • Based on fine particle pigments
  • For exclusive unique items
HYDRO stains that are used as special stains to achieve an antique effect on porous or highly textured woods. Unique stain finishes can be obtained when combined with a WAV pre-stain, with which for instance you can create a weathered surface.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

Use in parquet, furniture for interior decoration and interior fittings. This stain is formulated to spray without wiping. Specifically formulated for oak.

Technical specifications

Appearance glazing
Flow time (+/- 15 %) 60 s / DIN EN ISO 2431 - 3 mm
Form of delivery fluid
VOC EU % 0.02 %
Number of coats (max) 1
Amount per layer (minimum) 30 g/m²
Amount per layer (max) 60 g/m²
Total application volume 60 g/m²

Information on use

Drying 3 h / 20 °C
Surface preparation The wood must be dry, dust-free and grease-free.
Finishing After thorough drying, the stains are coated over using light stable Hesse PU or HYDRO lacquers.A natural wood coating such as DA 400-1, DE 42900-0003, or HDE 54500-0001 lends an unprocessed character. Complete drying must be guaranteed prior to recoating. Drying is delayed by low temperatures, reduced exchange of air, high humidity and large application amounts.
Working Temperature Range 16 - 25 °C
Storage temperature 5 - 30 °C
Working temperature 20 °C
conditions of transport frost-free - up to a maximum of 35 °C
Processing instructions An even, slightly damp spray application without wiping. Once the WAV pre-stain has dried, sand it for effect with a 150 grit abrasive sponge until the hard growth rings are raised. Then spray with WA post-stain and lightly wipe it, depending on the desired effect. Substrate treatment: use Andalon brushes to deeply texture solid pine, knotty pine and spruce (possibly oak) or slip matched veneers that are a minimum of 0.7 mm, preferably 1 mm thickness. Stir stains well before and during processing. The stains can be thinned with water, if required.
Particular instructions Can be tinted with colour concentrates in the range: BP 30xx, BP 3570. All stains from the same range can be mixed with one another.
General instructions on workmanship Trial staining of the original sanded wood with original lacquering should be carried out under real conditions. Only use stains from one batch for any one job. Do not pour soiled stains back into the original container. Clean tools with water immediately after use. Dried-on stain residue can be removed with thinners such as ZD 82.

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.