Ideal pre-treatment before staining furniture. Improves stain image and effect. Adds colour evenly. Also removes glue penetration of gluten glues.
| Appearance | not relevant |
| Density series kg/l | 1.02 |
| Flow time (+/- 15 %) | nicht bestimmbar keine Angabe |
| Form of delivery | Solid form |
| Non-volatile content series % | 100 |
| VOC EU % | 0 % |
| Drying | 4 h / 20 °C |
| Substrate sanding grits from-to | 100 - 150 |
| Finishing | After drying, the desired multiple layers can be initiated by, for example, applying a stain or basecoat. |
| Comments on sanding | The raw wood is carefully sanded. |
| Working Temperature Range | 16 - 25 °C |
| Storage temperature | 5 - 30 °C |
| Working temperature | 20 °C |
| conditions of transport | frost-free - up to a maximum of 35 °C |
| Particular instructions | Dissolve 25 g of wood soap in 1 l of boiling water. Apply this hot solution liberally and use a scrubbing brush to work it in the grain direction until it forms a foam. Allow it to absorb for 1 minute and then apply and brush the solution again. Next wash it off with lukewarm water, let the excess drip off the wood and dry it off with a clean cloth. Allow the wood to dry at 20 °C and then use 180 grit to sand it lightly, use 120 grit on softwood. On the same day, remove any resin pockets and then stain and prime the workpiece. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.