As final finish for silky feel and for freshening and care of oiled and waxed woods
| Appearance | colourless |
| Density series kg/l | 0.821 |
| Flow time (+/- 15 %) | nicht bestimmbar keine Angabe |
| Form of delivery | Paste |
| Non-volatile content series % | 37 |
| Proportion of renewable raw materials % | 18.1 |
| VOC EU % | 63 % |
| Number of coats (max) | 1 |
| Amount per layer (minimum) | 1 g/m² |
| Amount per layer (max) | 5 g/m² |
| Total application volume | 5 g/m² |
| Drying | 60 min / 20 °C |
| Complete drying | 60 min / 20 °C |
| Load bearing after | 1 h / 20 °C |
| Surface preparation | Oiled or waxed substrate For secondary parts, the product can be applied directly on the correctly polished bare wood. |
| Substrate sanding grits from-to | 240 - 320 |
| Finishing | Completely remove the surplus product and polish the surface again with a soft cotton cloth. |
| Yield per coat |
164 - 821 m²/l The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner. |
| Working Temperature Range | 20 - 40 °C |
| Storage temperature | 10 - 30 °C |
| Working temperature | 20 °C |
| conditions of transport | frost-free - up to a maximum of 35 °C |
| Processing instructions | Single manual application with a soft cotton cloth on oiled or waxed surfaces.. Completely remove the surplus product and polish the surface again with a soft cotton cloth. For secondary parts, the product can be applied directly on the correctly polished bare wood. |
| Particular instructions | No danger of self-ignition. Material contains no oxidative drying oils! Pre-priming possible according to the desired finish and substrate, for example with: GE 110, GE 120, GE 140 or GS 170. |
| General instructions on workmanship | Please apply a test coat under real conditions! |
Children’s room furnishings, natural maple
Wood sanding: 180 - 220 grit with subsequent dust removal.
Basecoat: 1 x 40 - 60 g/m² Proterra RESIT Wax Resin GS 170.
Drying: 30 - 60 min / 20 °C room temperature with sufficient air circulation.
Polishing rub-down: 400 grit with subsequent dust removal.
Final finish: manual application of Proterra CERA Wax balm GE 100 using a soft cotton cloth. Use another soft cotton cloth to remove the excess and polish the surface.
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.