Fields of application
Oiled furniture or other decorative wood surfaces subjected to low use. Its replenishing properties mean this product is not suitable for surfaces that regularly come into contact with textiles (interior surfaces of wardrobes, etc.).
Technical specifications
Appearance |
colourless
|
Density series kg/l |
0.922
|
Flow time (+/- 15 %) |
20 keine Angaben
|
Form of delivery |
fluid
|
Non-volatile content series % |
100 - 100
|
Profile of properties |
Accentuated
|
Proportion of renewable raw materials % |
99.9
|
VOC EU % |
0.01 %
|
Number of coats (max) |
2
|
Amount per layer (minimum) |
5 g/m²
|
Amount per layer (max) |
10 g/m²
|
Total application volume |
20 g/m²
|
Information on use
Drying |
2 h / 20 °C
|
Stackable after |
Immediately after regular application the oil and wiping-off the surplus.
|
Complete drying |
1 d / 20 °C
|
Surface preparation |
For the initial treatment of woods, correctly, sand and remove dust from the dry wood. Or as a care product for already oiled surfaces: to clean and dry the surface to be maintained.
|
Substrate sanding grits from-to |
240 - 320
|
Comments on sanding |
The raw-wood sanding must be adapted to the required application quantity; the lower the application quantity, the finer the sanding grit (up to grit 240 when buffing). Ensure that the edge sanding and surface sanding are even. The sanding quality is crucial in ensuring a good quality of the final coat!
|
Yield per coat |
92 - 184 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
Working Temperature Range |
10 - 30 °C
|
Storage temperature |
10 - 30 °C
|
Working temperature |
20 °C
|
conditions of transport |
frost-free - up to a maximum of 35 °C
|
Processing instructions |
Rub it in using a fine sanding fleece, allow brief absorption and then remove the excess using a cotton cloth. Impregnated cotton clothes can be washed at 60 °C after use using ordinary household detergents.
|
Particular instructions |
Due to the moisturising properties of the oil, contact with textiles can lead to stain formation. The product has limited water resistance. For coating the insides of cupboards, we recommend Proterra RESIT GS 17102 because of its low intrinsic smell.
|
General instructions on workmanship |
To maintain the character of the oiled surface, regular oiling is recommended. Please apply a test coat under real conditions!
|
Use a lightly soaked fine sanding fleece to gently rub GE 11066 onto the previously oiled furniture surface to be refreshed. Allow a brief absorption period and then use a cotton cloth to remove the excess until the surface appears uniformly oiled.
Safety Data Sheets / Certificates
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.