Proterra CERAFLUID GZ 1020-0001

  • Based on renewable raw materials
  • Low odour
  • Free of pollutants
Oil/wax combination based on non-drying vegetable oil, beeswax and carnauba wax, pastes, extremely low odour, skin-friendly. It is water-repellent and removes a great variety of stains.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

As final finish for silky feel and for freshening and care of oiled and waxed woods

Technical specifications

Appearance colourless
Decopaint basis LB
Decopaint category F
Density series kg/l 0.819
Flow time (+/- 15 %) nicht bestimmbar keine Angabe
Form of delivery Paste
Non-volatile content series % 37 - 37
VOC EU % 63 %
Number of coats (max) 1
Amount per layer (minimum) 1 g/m²
Amount per layer (max) 5 g/m²
Total application volume 5 g/m²

Information on use

Drying 60 min / 20 °C
Complete drying 60 min / 20 °C
Load bearing after 1 h / 20 °C
Surface preparation Oiled or waxed substrate For secondary parts, the product can be applied directly on the correctly polished bare wood.
Finishing Completely remove the surplus product and polish the surface again with a soft cotton cloth.
Yield per coat 164 - 819 m²/l

The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions Single manual application with a soft cotton cloth on oiled or waxed surfaces.. Completely remove the surplus product and polish the surface again with a soft cotton cloth. For secondary parts, the product can be applied directly on the correctly polished bare wood.
Particular instructions No danger of self-ignition. Material contains no oxidative drying oils! Depending on the desired surface and base material, priming can be carried out with, e.g: GE 11025-2001, GE 12006-2001, GE 14004-2001 or GE 17102.
General instructions on workmanship Please apply a test coat under real conditions!

Children's room fittings, natural maple
Wood sanding: grit 180 - 220 with subsequent dust removal.
Basecoat: 1 x 40 - 60 g/m² Proterra RESIT Wax resin GS 17102.
Drying: approx. 30 - 60 min / 20 °C room temperature and adequate air circulation
Polishing sanding: 400 grit with following de-dusting.
End finish: by manual application with soft cotton cloth Proterra CERA Wax balsam GZ 1020-0001. Remove excess and polish surface with a soft cotton cloth.

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.