Hesse WHITE SOAP GR 1900-0700

  • solvent-free and biodegradable surface finish
  • also suitable for cleaning and care of light parquet and furniture surfaces.
  • water-dilutable and extremely low-odour.
Solvent-free and biodegradable Cleaning solution for surface treatment. Can also be used for cleaning and care for light parquet/wooden floors and furniture surfaces. It is water-dilutable, pigmented and extremely low-odour.
Request product Download data sheet
  • Description
  • Information on use
  • Sample process
  • Safety Data Sheets / Certificates

Fields of application

Cleaning and care product for white or light parquet or wooded floors and furniture surfaces; or directly on raw wood. This achieves a lighter soap effect that is dependent on the species of wood. Not suitable for mirrors, marble or non-slip surfaces.

Technical specifications

Giscode GE10
Appearance glazing
Density series kg/l 1.023
Flow time 60 s / DIN 53211 - 4 mm
Form of delivery fluid
Non-volatile content series % 6.2
Profile of properties Brightening
VOC EU % 0.01 %

Information on use

Accessible after 6 h / 20 °C
Load bearing after 16 h / 20 °C
Surface preparation Loose dust and dirt should be swept or vacuumed up. Other contamination should be removed appropriately, without leaving any residues. In the case of direct application on raw wood: raw-wood sanding as per instructions, followed by dust removal. On moisture-sensitive substrates, e.g. beech, wooden paving, etc., soaps are not recommended on account of the high moisture level.
Storage temperature 10 - 30 °C
Working temperature 20 °C
Processing instructions Loose dust and dirt should be swept or vacuumed up. Other contamination should be removed appropriately, without leaving any residues. On moisture-sensitive substrates, e.g. beech, wooden paving, etc., soaps are not recommended on account of the high moisture level. In addition, cleaning and care must only be carried out using a damp, not wet, cloth here.Cleaning and care product for light, lightly-soaped or oiled surfaces: WHITE SOAP at a ratio of 2 : 100 (100 ml to 5 l water) with water and apply this cleaning solution with a mop evenly, not too wet, thereby removing the dirt from the surface. Then wash out the mop with clean water and damp-wipe the surface again with fresh cleaning solution and leave to dry. Do not rinse the surfaces with clean water! When using as a "soap": mix Hesse WHITE SOAP at a ratio of 1 : 5 (1 l to 5 l water) with lukewarm water and wipe the wooden floor with a lightly wrung mop in the direction of the grit. Then leave the surface to dry. If necessary, repeat this process another 1 - 3 times. Do not rinse with clean water!
Particular instructions Damp-wipe! Do not rinse with clean water. If required, the dry surface can be lightly polished using a white, non-abrasive pad. Caution: A parquet surface which is only ever soaped only exhibits a low chemical and mechanical resistance and must accordingly be cleaned and refreshed regularly! Overpaintability: Surface treated with soap are then in principle only cared for and cleaned using special soap cleaners. In exceptional cases, the surface is just carefully repolished a little with a grinding-in machine and white pad. Keep locked away and out of the reach of children! Containers should only be put out for recycling when they have been completely emptied. according to Regulation (EC) no. 648/2004: Pigment White 6; carnauba wax, non-ionic surfactants (less than 5 %); perfume oil, 1,2-benzisothiazole-3(2H)-one, methylisothiazolinone, Data sheet for medical staff available from: info@hesse-lignal.de.
General instructions on workmanship Test before use on an original surface! Please also note our special care instructions for floor surfaces in accordance with DIN 18356! Only wipe parquet with a soft, damp cloth not a wet cloth. Use only neutral cleaners free from silicone, ammonium chloride and abrasives. Regular care and cleaning with Hesse PROTECT-CLEANER PR 90 and Hesse INTENSIVE-CLEANER PR 91 increase the lifespan of the coating.

Parquet, pine/fir "Scandinavian effect"
Substrate preparation: clean, professionally installed and correctly pretreated parquet/wooden floor with graduating bare wood sanding.
Mix 1 x Hesse WHITE SOAP in a ratio of 1 : 5 with lukewarm water (1 l to 5 l water) and wipe the wood flooring in the direction of the grain using a lightly wrung mop. Then leave the surface to dry. Repeat this process another 1 - 3 x as necessary. Do not rinse with clean water. The surface can then be lightly polished if required using a single-disc sander with a white, non-abrasive pad. This also consolidates the surface.

Safety Data Sheets / Certificates

Material Safety Data Sheets

Contact

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.