Fields of application
For interior woodwork such as living room, bedrooms and children's furniture. Also ideal for varnishing inside cupboards and for children's toys.
Technical specifications
| Appearance |
colourless
|
| Density series kg/l |
0.85 - 0.855
|
| Flow time (+/- 15 %) |
48 s / DIN EN ISO 2431 - 4 mm
|
| Form of delivery |
fluid
|
| Non-volatile content series % |
16 - 20
|
| Proportion of renewable raw materials % |
0.8 - 0.9
|
| VOC EU % |
76.589996 %
|
| Number of coats (max) |
2
|
| Amount per layer (minimum) |
30 g/m²
|
| Amount per layer (max) |
60 g/m²
|
| Total application volume |
120 g/m²
|
Information on use
| Drying |
1 h / 20 °C
|
| Stackable after |
> 1 - 2 h / 20 °C
|
| Complete drying |
16 h / 20 °C
|
| Surface preparation |
Clean, dry wood, free of oil, grease, wax and silicones. Sanded as prescribed and free from sanding dust.
|
| Substrate sanding grits from-to |
180 - 320
|
| Lacquer sanding (grit) from - to |
400
|
| Finishing |
Once sufficiently dry, the surface can be given a final treatment with, for example, GZ 1020-0001, GE 100, GZ 1021, GZ 1622, GZ 1023 or GE 12006-2001
|
| Comments on sanding |
The quality and uniformity of the wood and of the lacquer sanding are crucial to the final surface finish. After sanding, remove dust as prescribed.
|
| Yield per coat |
14 - 28 m²/l
The spreading rate is heavily dependent on the type of application. The specifications relate to a liter of ready-for-use product, if necessary including hardener and thinner.
|
| Working Temperature Range |
20 - 40 °C
|
| Storage temperature |
10 - 30 °C
|
| Working temperature |
20 °C
|
| conditions of transport |
frost-free - up to a maximum of 35 °C
|
| Processing instructions |
Before use, stir well and agitate! The mechanical and chemical resistance of the surface will be increased by hardening at 10 : 1 (by volume or by weight) using Hardener OR 5170. The mixture must be used within 2 h / 20 °C room temperature.The hardener contains isocyanate. Please observe safety instructions; see the safety data sheet.
|
| Particular instructions |
On dark woods such as walnut and alder, the equalising effect can be undesirable. The material contains no oils that dry by oxidation and therefore develops no heat while drying. There is therefore no danger of self-ignition of cloths/pads wetted with the product. When using products such as Proterra CEROL, e.g. GE 12006-2001, as end finish. Please observe the instructions for handling of oxidative (self-igniting) materials. See technical information for the products in question.
|
| General instructions on workmanship |
Please conduct a sample coating under real conditions!
|
Children's room fittings, natural maple Wood sanding: 180 - 220 grit followed by dust removal. Priming 1 x 40 - 60 g/m² with Proterra RESIT GE 17102. Drying: 30 - 60 min / 20° C room temperature and with good ventilation. Polishing rub-down: grit 400 with subsequent dust removal. Final finish with hand application of Proterra CERAFLUID GZ 1020-0001 with cotton cloth. Finally, polish in lightly and evenly with soft, cotton cloth.
Safety Data Sheets / Certificates
Material Safety Data Sheets
Contact
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always
available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge
available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our
terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
